Search results for query: *

Sprayed the base coat on my 74 Charger 4th of July weedend. Went to spray clear coat and had the wrong hardner. Four days later sanded base coat then sprayed clear coat. Using PPG DBI and 2002 clear. Did not turn out right. Reread sheet and I should have sprayed another base coat before the...

74 Charger, fender is off the car. About eight inches aft of the hole for the fender mounted turn signal I have been working with hammer and dollie to take out some dings. Now I have an area about inch and half in dia. that is "oil canning". I push on it and it pops up, push on that and it pops...

On my 74 Charger I have painted the bottom, engine bay, all four wheel wells, interior, and trunk area. All these places I have media blasted, cleaned with wax and grease remover, primed and top coated with no problem. I painted the front and rear valances the other day and it orange peeled. I...

What color is the taillight housing on a 74 Charger non SE. I thought it was light argent. Bought a can of light argent from Totally Auto and it was textured. Bought a can of light argent from Herbs it was textured and on the can it reads argent silver. So what's up with that?

Have surface rust inside the door on the hinge end. Does not go through. Surface rust also where the quarter windows roll down into. And on the ceiling between the frames. All these areas I cannot get a wire brush, sandpapper or even my hands to to remove the rust.What should I do to stop the...

When I took the old trunk floor out there was seam sealer between the floor and the tail panel. Do I need to put seam sealer back between the two before I spot weld? This is on a 74 Charger

On a 74 Charger how is the trunck floor pan fastened to the frame rails? I can't see any spot wields.