Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I took my 1971 RT to a local body shop to install two new passenger door hinges (upper and lower) to help my slightly sagging door. They suggested I also replace the striker and I said fine. They picked up a pack of 2 strikers at a local auto parts store. They fixed the passenger door just fine...
Were the factory hood pin plates attached to the hood with four machine-type screws or four sheet metal-type screws?
If you have a picture of yours from the underside of the hood and it is original equipment, please send and thanks!
I have a Scat Pack Bee decal in the original, part number3505101, left side quarter glass. It's new, but 40+ years old. The Bee is affixed to the backing paper and won't separate. Also, the Bee does not have too much stick left. You can place it against the window but not much stick. And it does...
I understand that the radiator support core in the 1971 Chargers is typically painted black on the forward facing (grille) side.
My question is what kind of black? Flat?
Dupli-Color has a nice low gloss black that looks somewhat flat. Any other suggestions?
And if anyone has a sample picture...
The seals/trim/felt/rubber in the door where the window slides through on my Charger needs to be replaced due to age. I see Classic Industries sells the set for all the windows. Anyone tried it? It's close to $200 so I would like to know if anyone has any good or bad experience with the product...
I have seen some 1971 Charger RTs with the scat pack bee decal in the quarter glass. Is this something that came from the factory or was it dealer installed (or perhaps something else)? Does it go on both windows or just one?
Also, any suggestions for the best aftermarket scat pack bee decal...
Good afternoon:
What is the proper orientation for the door jamb VIN decal for a 1971 Charger? I have seen them both vertical and horizontal in the door jamb. If it makes any difference, mine was from St. Louis.
Thanks!
Looking for a photos/photos of the factory original antenna on a 1971 RT. Not sure if mine came with the car or if it was changed along the road. I think it was changed. Thanks!
Good morning: Question: I've seen 1971 Dodge Charger bumpers with the two vertical slots for the jack stand, and also bumpers without the slot (all solid). The 1970-71 Mopar Parts catalog suggests there was a mid year change in the bumpers for the 1971 Charger. Am I reading this correctly? Did...
Good evening: Did the 1971 doge charger hood pin plate come with 3 screws or four? I've seen both lately. But four screws seems to be the most cpommon.
Thanks!
Mark