Search results for query: *

I have anti freeze leaking around 2, 4, 6, & 8. The right side is fine. I have TTI headers and, 915 heads. Does anyone know what needs to be done to repair this? Thanks, Kenton.

I have 2 left side brackets. Does anyone have 2 right side’s they want to sell? Or even if you have one let me know. Just trying to make a couple of complete sets. Thanks.

on my 64 Belvedere with a big block (RB) and later 727. As you can see from the pictures the end of the 727 sets off center to the left. I am putting a bracket car together for a little fun. I'm going to have a Turbo Action shifter with a later 727, but the mount must not be the one I need. Any...

Do all 8 3/4s use the same yoke? and is anything to know about changing the yoke? I want to switch mine to the bigger U joint, It's 1965 with a 3:91 sure grip in a 741 case.

can anyone tell me if the pilot hole in the back of a big block crank varies from one year to another? I’m taking automatic only. I know the torque converters change spline count between 65 and 66 but don’t know about the other side of the torque converter, (the pilot side) Thanks for your replies.

I have a 69 Roadrunner that seems to have a problem going from 2nd to 3rd. It acts like it can’t make up its mind on which gear it wants to be in. It shudders for what seems like a second or two, then goes to 3rd. It doesn’t do it all the time, but probably 3 out of 5 times.

I will be going threw a 727 cable shift transmission. I am going to put a 24 spline input shaft in it, with a newer reaction shaft. That way I will have a greater selection of torque converters. I will also be going to a 5 disk front clutch pack. I was wondering if I could go to a 71 front...

I have 60 P.S.I. when driving, but if I have to make a hard stop it drops to 0 and stays there for 15 seconds or so. It is a 1969 383 with a 402 pan. Any ideas would be appreciated.

I need 2 of the reverse blocker springs for a 64 or 65. there may be other years that are the same. It is the one that the separator plate holds down.

Can any one tell me how to get the tail shaft housing off of a 1964 904 transmission ? It does not have the phillips screw cover and snap ring. Thanks. It's like the one on the right.

I need a 64 or 65 console or column shift valve body. Push button will not work as it doesn't have extra depth for cable when in park. Send me a PM with picture and cost with shipping to 83440 zip code. will pay by pay pal so don't forget to add your 3%. I may buy more than one so send me your...