Search results for query: *

I'm wondering if you really need to run a "mellonized" intermediate shaft gear on a Hydraulic Roller cam. The cam is from Howards and they are telling me the Milodan 21505 would work just fine. Talking to 440 Source and they are saying mellonizing is an absolute must. So whats the deal? I want...

Hey All - Looking to replace my stock timing cover on a 71 block (internally balanced). It appears to have the stock timing cover with the timing tab attached. I'm looking at the milodon 65650 and wondering if I need a timing pointer like 440source sells (part #: 121-1063). My other option is to...

I have a simple question and I cant seem to find it anywhere on the net. When installing a new bronze bushing for the intermediate shaft on a 440, how should the slots be positioned? Does it even matter? Looks like there's two slots on top and then a slot on the inside down the center. I'm...

I know this has been beaten to death but there is so many combo's out there and I cant find anything that's up my ally. I'm looking for a Hydraulic Flat Tappet Street/Strip Cam suggestions. I'll list my specs below. I just want a nice cam that will be lumpy(110 or 112 Lobe) and create good...

I'm just curious your opinion on what a used 833 23 spline (pulled working fine) 4 speed, 11" bell housing, 143 tooth flywheel; setup for a cast crank 440 & crossmember would be worth? I also have 2 shifters(Non console) & all the Z bar stuff as well that would go along with it. All you'd need...

So back in August I installed the Borgeson steering conversion box. Got all done after 2 days and took the car around the block to make sure everything is good to go. I get back to my buddies place and pop the hood and as I'm listening to the valve train click away I rev the engine up just a...

Hey Guys - I cant seem to find the lowers radiator hose size anywhere. I know my Champion Radiator lower connection is 1-1/2" and I believe the connection at the water pump housing is a 1-3/4" but I want to make sure. Anyone know?