Search results for query: *

Volunteering my build for a keyboard dyno session LOL. Just curious what the experienced forum members think my current build will output. 440 .030 over L2355 pistons flattop 4v relief Trickflow 240’s SFT .534/.540 239/242 @ .050 112LSA 10.5:1 CR 6bbl with port matched Edelbrock intake 1-7/8...

Hello as I’m going through my 727 I noticed rub marks on the shell and on the welds of the front planet ring gear. The thrust washer looks like it’s never been touched! Is there different thickness 3 tang washers available? This one measures .062 and like I said it’s apparent it’s never made...

I am currently building my 440 which I had the machine shop balance for me. It’s a forged crank and L2355 pistons My question is, what harmonic balancer should I use? Am I right in assuming it should be a Zero balance Balancer and any converter I use shouldn’t have any weights?? I intend to use...

I am working on a 1970 Coronet with a 440 and TTi headers. Any suggestions on how to shift the motor over to the passenger side a bit. I only have minimal clearance between the header and torsion bar on the drivers side. It’s got new mounts as well.

Good day, I’m hoping someone recognizes this cam number to help me identify it. Just pulled it out of a 440, solid flat tappet cam. Thanks for any help

I've getting ready to start my build up of a Hemi for street use. My intended use would be a hot street cruiser with best possible street manners within the street configuration. I can easily use manual brakes but will likely be using power steering and a/c due to hot south texas weather, I'm...