Search results for query: *

I just noticed this and can't tell from the service manual pics - is there supposed to be a nut on the thread as seen in the below pics?

I swapped my 3:91 for a 3:55, the torque spec for the nuts is 45 ft. lbs. and 35 ft. lbs. for axles. I don't own a torque wrench so borrowed one (1/2 inch drive) from Auto Zone. I "bench tested" the torque feel in my workbench vise and 45 ft lbs. seem WAY TOO MuCH and think I can hand tighten by...

DoctorDiff "Out-of-stock" 8 3/4" 489 Case Third Member – Seeking New 3:23 Sure Grip ASAP! Oh no! Should have thought about this last Winter - I finally decide to pull the trigger ready to swap my tired (and scary loud) 3:91 with leaky axle and contacted the good Dr. (Cass via text) today and he...

Greetings Mopar Gurus (& Geeks lol): After nearly 5 years of living with and loving my 3:91 sure grip the time has come to rebuild/replace AND do rear axles seals and bearings (one side leaking for a while). There is a lot of drivetrain noises getting worse and gets scary > 55 mph these days…...

Please help - in the process of replacing leaky valve cover gaskets I discovered that 8 of 12 bolts appear to be correct OEM w/ captive washer but 4 were different type (not correct no captive washer and heads different hardware store). Then I started to research and found a kit on e-bay that...