Search results for query: *

Sorry to post but not sure where to go with this... finally drove my car for about the 5th time tongiht, put bout 40 minutes on it and it's beyond a dog... Since i put the car together just moving it in and out of the garage it never felt right almost like it's fighting itself to move. But no...

K, have never done a ring and pinion before.. a little information first. I mentioned to a buddy i wouldn't mind a suregrip.. he shows up a few days later with a 4.57 in a 742 case that had never been run but setup many years ago.. Some local old racers gave it to him for me to put in my car...

My car has defeated me... someone bout to get a smoking deal to make it go away .. wahh poor me..ok onto the problem.. Gonna go through what was all done to it before symptoms, will try to be thorough. 1962 small block pushbutton 727 Pump/front drum (the one that rides on the stator, i am not...

Hi guys, started working on my trans tonight, got everything cleaned, new seals and rings good to go.. I got a A&A Billet reverse piston (had one blow out the retainer once years ago, never want that again) Problem is they send it in pieces and the directions sheet with it is so faded i can't...

Getting ready to put my trans together but missing a few parts still.. on the early 727s the output shaft bearing is all the way at the back of the tailhousing.. would anyone have a part number for that? or is it the same as the mid bearing on the 66+ trans? Could use a new TV rod seal but they...

So i found a mid 70s 727 to scavenge from and grabbed the pump, input shaft and front 2 drums (can never remember which is the direct and forward) Just want to make sure that's all i need to convert to 24 spline? I don't think there is anything else worth swapping from the newer trans... My...

Just wanted to verify this before ordering stuffs.. Transgo lists the tf-2 for all alum 727's but i see web pages selling it like Cope saying 66+ only... can anyone verify that the TF2 works fine in pushbuttons?

k.. so today got good... a friend just dropped off a free 742 housing with 4.57s in it.. which are WAY more than i wanted (was gonna do like 3.55) but.. i'm not gonna say no to it of course :) I don't highway drive so that's not an issue anyway.. the question is.. 1962 tapered axle rear end with...

Was hoping to re-use my u-bolts, they are fine except where the nuts where, the threads are kinda flattened and i don't wanna risk a issue, does anyone sell ubolts with the top of the U flattened or are they all just round now? ESPO's pics show theirs as round or i would just add to my order...

Hello, so gave up on the poly (opened it up inside is worse than inside the valve covers..) going to pick up a 1964 383 with pushbutton trans locally, I am waiting for a reply if it was a dash pushbutton or console (i think i read they are different) but the thing i was wondering today is are...