Search results for query: *

My 66 Charger came with a 360 with a 1973 date code. I have no idea what has been done to this engine prior to my ownership. I upgraded the front end to Disk brakes and a Borgeson power steering unit. While bolting my new Power Steering pump in the bolts that bolt into the water jacket pulled...

This weekend I finally got around to pulling my left rear axle to put Normal left threaded lugs in it (after my Disk Conversion on the front it was a odd man Charlie). anyhow while putting it all back together I notices there's an awful lot of lash when I turn the wheel till I feel the gear...

I have a LA 360 question. The Previous owner of my 66 Charger installed a LA 360 with a 1793 build date in it. I took off the timing cover to address 2 of the 4 Water pump bolts that go into the water jacket had corroded ( apparently the PO liked using raw water without corrosion...

I have a 1973 LA360 the PO installed in my 1966 Charger. While installing my Doug’s Headers I found a brace that goes from the middle of the drivers side engine block to the left hand bottom of the transmission. I had to remove it for the Header to fit. I may be able to grind a relief in it but...

Trying to figure out who makes headers for a B body with a LA engine that doesn’t have the dangled drag Link going through the middle of them. I have a 1973 360 in a 1966 Charger. I put a borgeson steering gear in it and had to beat the stuffing out of the header tubes to clear the pitman arm. I...

I have a 66 Charger that the PO swapped a 1973 360 into. He put headers (I don't know what brand) on it but they have the steering link bar going smack between them on the drivers side. What companies make headers that clear the link bar and doesn't have it going in between them.

Hello. My 1966 Charger was re-engined by a previous owner . From 318 to a 360. How do I find out what year engine it is? Thanks