Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can someone tell me what the brake booster push rod should be set to on a '73 Front disk brake system? I have a '69 but it's retrofitted with Dr. Diff's front disk conversion kit. It's been on a few years and this year the brakes were spongy so I bled them.
The brake pedal travels quite a bit...
I know there are no options for the cap replacement but has anyone figured out a way to makes these seal again once the gasket no longer does it's job? Is there a new gasket available? If there is how is it replaced? My cap has an integrated dipstick and its all riveted, it doesn't look like the...
So a few weeks ago I diagnosed a clunk in my steering/suspension to a loose steering gear box. I had the car up on jacks today so I could start messing with my transmission leak (Got a new O-ring for the dipstick hopefully that fixes it since the last one I used just came from the Harbor Freight...
Hey guys I just wanted to make sure I was going to attempt to do this right. Working on my Roadrunner, it's got a federal style power steering pump. The fluid is dirty/milky and needs to be flushed. To do this I would just disconnect the return line at the pump, stick in a container and continue...
Hey Guys I'm having a fluid contamination issue. So I noticed a few weeks ago my car was pulling to the right upon braking, to the point that it would change lanes if I didn't fight it. Scared the shiz out of me the first time it happened. So I checked my master cylinder and the forward section...
Before I order these I just want to see if someone can confirm that these will work for my application. These are Monroe shocks (p/n 31131) for a Dodge truck. I needed a longer shock because I rearched my rear springs on the Roadrunner 2". I measured from the lower shock mounting point to the...
So once I got through the scale, rust, and poorly sprayed black paint. I found red paint on my rear drums but didn't appear to cover the whole drum. It seemed to stop about where the fins start on the drum. I've heard that this means the car would have been equipped with optional wheels. Is this...
So I semi knew this was coming but I really didn't want to hear it. I finally got my front end all put back together, the brakes bled, and tires put back on. Totally excited but I got a bad feeling during the installation of my front end and the alignment guy confirmed my feeling. My runner had...
Can anyone tell me why the LCA shaft and strut can't be tightened until last? Is it so you can adjust the height, then you can tighten them? It just seems to me it would be hard to get accurate alignments with nuts and bolts loose. It's a '69 Runner but I'm pretty sure the procedural steps are...
Hey guys, I have a couple newbie questions for ya. First, I am rebuilding the front end (first time and most everything has gone smooth so far) I have the P S T kit but I ordered torsion bar dust boots from Energy Suspension. My problem is I can't get the dang boots over the torsion bar. Does...