Search results for query: *

I’m gonna ask what is probably a dumb question. I’ve got all my brake lines installed/connected and now I’m down to bench bleeding my MC and connecting the lines to it. If the master cylinder has brake fluid in after you bench bleed it, how do you connect the remaining lines to the MC without...

Today I just finished getting all of the front suspension put back in the car (69 charger 383). I’m running into an issue with the height on the front drivers side. The short version is the adjustment bolt isn’t seeming to raise the car like it should. The passenger side is at the desired ride...

I am going to be putting back together my suspension (control arms, spindles, idler/pitman arms, etc) and was wondering where I could get the torque spec info for this? This is for a 1969 charger.

I am needing to replace the proportioning valve on a 1969 Charger. This is supposed to be a factory front disc/rear drum car but recently determined that my master cylinder was for a drum/drum car. Didn’t think much of it but when I started looking for the proportioning valve that matches the...

Can someone help me out with the Bilstein part number a 1969 charger? Front shocks only. Is it 55-R082?

I am needing to replace my master cylinder on a 69 charger factory front disc brake car. I’m not interested in rebuilding the one I have. Just curious what other people out there are buying as an original replacement. This car isn’t ever going to see a racetrack or anything remotely close. If I...

I am in the process of rebuilding my front suspension and brakes on a 1969 charger. The car is a factory front disc brake car. I am keeping the stock suspension. I am looking at options for the caliper/rotor replacements. What options are there for keeping my stock spindles? I have been in...

Has anyone out there rebuilt calipers? I have the original disc brakes on the front of my 69. None of the original stuff has been replaced. With all the aftermarket stuff available is it worth rebuilding? Pain the a** or not complicated? I’m not worried about keeping my car original. I want to...

I am in the process or re-building the rear drums in a 69 charger. In a video I watched on-line there is a gasket that the guy used for the wheel cylnder replacement (mine is part number W78734-BX). My wheel cylinders did not come with a gasket and when I spoke with Summit they could not find...

I have a 68 Charger with Hotchkis 1” drop leaf springs. I love everything about these, except the cost (pics below). I’m looking for a good alternative for a 69 project car. I’ve seen a lot of positive feedback on the ESPO leaf springs. I am wanting the height to be similar to what I have now...

I recently acquired a 1969 charger SE, 383 car with factory front disc brakes. On my 68 I used Wilwood for everything, but I am not wanting to spend that kind of money on this car. Any suggestions on a good rotor/caliper brand that is more economical but still a good quality product? I am...