Search results for query: *

Hi guys I'm in the home stretch with my coronet project and am having problems with the drive shaft. So I converted the car to a 4 speed and all parts came from a 65 Satellite. Now here comes the problem the trans has that weird cup with the studs on the output side and the drive shaft that came...

Does hurst, or another company make a short throw shifter for a 65 coronet with a 4 speed? Thanks

So I replaced all brake lines, wheel cylinders on all 4 wheels new shoes and hard wear, new "master" (which I think is the problem). Now the situation I bled and bled and got all the air out of the lines but the pedal just sinks to the floor, so went back got another same thing, so the term...

Hey can some one do mr a favor and post a couple pics of the engine mounts in a 65 dodge coronet with the engine in the car. Im having problems with my engine sitting to far forward and the zbar studs don't line up from the frame to the bell housing. thanks

Hey guys just wanted to show my find, I found a new fiberglass hood for 200 bucks on craigslist. also wanted to show a updated picture of the car I have gotten the brakes fixed (now it will stop) trans and engine are all cleaned up and ready to go back in. Next will be the body and interior work...

Im looking into buying one of theses for my 65 coronet my question is is it a cap ? or cut out the old and weld in the new ?????? thanks https://www.yearone.com/Catalog/CatalogSearch/24

Just wondering where I can get the rest of the miscellaneous nylon washers and springs that I need to finish my 4 speed swap. here is what I have so far. Thanks for any help in advance.

Is there a company that makes patch pieces for a 65 Coronet, for the torsion bar cross member mines rotting out kinda bad under the torsion bar. Or does anyone know of a good place to take it to get fixed in southeasten WI

So I went to go swap out my auto brake pedal assembly with the manual brake clutch assembly today in my 65 coronet and noticed that the studs on the brace for the clutch pedal do not line up with the holes in the firewall. Is this suppose to be a simple unbolt-boltin process. The setup is from a...

So I lost brakes going down the road last monday night. Turns out or what my dad and I thought it was was the master cylinder, because there is no brakes fluid leaking out anywhere on the car. So I went to bumper to bumper and got a reman put it in and still don't have brakes. The brakes pump up...

Has anyone made there own custom dash/ gauges for their 65 coronet if so how did you mount all the heater and ac controls? And what material did you use. pics would be great. thanks

So now that the car is functional again its time to turn my attention to the rust. This is a new adventure for me so what are some obstacles to watch out for in fixing the lower front fender and lower rears quarters? The guy I bought the car from gave me all the patch panels for the car also...

Has anyone added leafs? where did you get them I'm looking to get a little more height in the back but don't want to go out and buy a whole new spring. thanks Kyle

Has anyone had any luck with year ones forward headlight harness, is everything there? Is it good quality? Thanks

Is this the right bracket for the car, the reason I ask is that i can't find a single belt to fit the car ???? 65 coronet with a 383 bb http://www.flickr.com/photos/69994661@N03/6888513395/ http://www.flickr.com/photos/69994661@N03/6888512217/in/photostream/

Will 1965 dodge dart door locks swap into the door of a 65 coronet?

Does any one know where I can find the drives side hub for my 65 coronet, all I need is the hub itself not the drum. Thanks Kyle http://www.flickr.com/photos/69994661@N03/6849985483/in/photostream

Just a quick question I found a 4 speed set up for my 65 coronet. But don't know on the price everything that is included is trans and console bell housing z bar drive shaft cross member shifter pedal assembly clutch assembly flywheel. He wants 2000 for everything or obo is this a good price...

Hi does anyone know if the rear seat for a 66-67 coronet will fit in the back of a 65 coronet ? I have a chance to get a nice one cheep. Thanks

hi Some time in the future i am planning on making my 65 coronet 500 with a 383 stick i was just wondering how hard it would be to get all the parts to do so, like pedal assembly sifter, linkage and so on. thank you for any advice, this may be next summers project.