Search results for query: *

Ok guys. I got my engine put together and ran on the dyno. It made decent numbers. 520hp and 530 ftlbs torque at 4400. I have a comp roller thumper cam and all the necessary valve train components per comp and my engine builder ( who I would recommend to anyone building a mopar or any engine)...

Finally got my fenders and hood on! I was so happy that I didn't have to cut my hood braces for the crossram to fit. Friday she gets exhaust then an alignment. Then I just have to wait for decent weather! - - - Updated - - - Not sure why these pics uploaded sideways put hopefully you can still...

Can anyone tell me the best way to install headers on the max wedge. Looking to see if there is a simple way that someone has done before or if it just plain stinks no matter what way you do it. Thanks in advance.

Does anyone know if you have to cut the hood braces to run a factory cross ram and factory style repop air cleaners on a 64 plymouth? I don't want a hood scoop and really don't wanna cut the braces but will if I have too. Thanks in advance

Hey guys. Does any one know of an aftermarket upper radiator hose part number for a 64 Plymouth. I have both the straight and 45 degree water neck for the pump housing but would rather use the straight one cuz its in better shape. My radiator outlet is on the passenger side on the top. I see...

Hey guys. I bought a set of Mopar performance after market max wedge heads from summit and the valve covers are six bolt style instead of four. I have a set of four bolt but need the six to work on these heads. Where whould be the best place to get a set with the proper oilfill and breather cap...

Can anyone tell me if there is a rubber gromet that goes into the firewall where your throttle cable passes through on a 64 Plymouth? Seems like there should be something there to seal it off. Thanks

Has any one attempted to over haul their manual steering box and if so how difficult is it? Not sure if I should try this on my own or throw down the cash for a new one from firm feel. Any help is much appreciated. Thanks in advance for any feedback.

Here are some pics of my 64 savoy project.

Can anyone tell me if there is a vendor or manufacturer of steel wheels for these early B bodies. I have called a few people with no luck as of yet. Dont wanna buy the torque thrust wheels if i dont have too. Love the steelies! Also i would love to post some pics of my car but not sure how to do...

Ok guys heres my question. I needed doors for my 64 plymouth savoy and was able to locate 2 nice ones however they were completely disassembled. I am to the point in the project were i need to put them together and have no clue where to start. I would assume the wing windows go in first but not...

Can anyone tell me if a normal 64 savoy hood will work over top a crossram intake or do you have to cut any of the bracing for the air cleaners to fit? Thanks in advance.