Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I hooked my car up to a dyno this weekend. I thought by HP numbers were going to be a bit higher but maybe this is where she should be. These numbers are not corrected for anything they are as exact as they can be to the rear wheels. I definitely have a little more tuning to do as at idle my...
Hey guys I put all my trim clips in and have one left but two holes left over on the car. How many trip clips go on the a pillar (sides of the windshield)? On my passenger side I have two holes, one in the lower area and one in the middle. On the driver's side I have three holes top, middle...
Well I bought new hardware and threw away my old hardware...Now I can't remember where I put the new hardware. Could somebody tell me the size washers and bolts for the metal splash shield that goes on the rear of the fenders for a '69 B body. Or at the very least the size of the washers. Thanks.
Guys,
I've tried adjusting everything and I just can't seem to get the window to swing enough outboard to get it to line up with the roof rail seal. As you can see from the picture I've got a ways to go to get it lined up. I've bottomed out my adjustments and the lower nut that is on the...
I'm having trouble getting the vertical quarter seals off my window frame for my 69 RR. Every time I get a little bit of it off and start pulling it just tears, at this rate I'll have both seals off by next Christmas. Are there any tips on getting these off? Can I soak them in anything to loosen...
Does anybody have a pic of the area behind the front grille on a '69 Roadrunner. I'm thinking if have too many screw holes in that area and can't find a good picture of a '69 with the grille and bezels removed.
Hey guys. I'm having trouble finding out which adapter I'm supposed to use for my kickdown linkage. I have a 69 RR with the edelbrock 1405 performer carb and my kickdown linkage doesn't reach. Does anybody know what extension part number I'm supposed to use to solve this problem? Thanks for any...
I just wanted to share my last few months of restoration experience with all you guys. Having just turned 26 and no real experience except for the 8 years I spent working on aircraft in the Air Force and tinkering with vehicles (nothing major) my whole life I think I got my first taste of bad...
Guys I've got a question for ya...My '69 Roadrunner has these white plastic clips all along the rocker panel expanding from wheel to wheel. So I'm guessing there was maybe a chrome piece or something here? I've seen it on GTXs but not on Roadrunners. How rare is that option on a Runner because...