Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have not taken any window trim yet but looking for some suggestions. When it rains, sometimes the passenger A pillar will have water running down the inside of it. The water exits under the dash and drips on the mat. If I cover the corner of the passenger side windshield at the junction of...
I have a GM Alternator, Delco/Remi Part No. 1101028 — Part 27SI/100 (12V-NEG-80A) W/RESISTOR. It came the car. I had to replace the mechanical fuel pump, used a Quick Fuel 30-440 unit. I now have a clearance problem. Using old belt the alternator is hitting the fuel pump. Found a belt that...
When I was testing my sending unit and fuel gauge I used the full range, top to bottom. I made a few adjustments to the float level to match the testing. My silly question is: what is the full fuel tank in the tank? Is it to the top of the tank or some place lower? I put fuel into the tank...
I have replaced the gas tank with a used one, correct for the car. The car had a C body tank installed and things were butchered. The "J" bolt brackets were removed. I have the vent line located in the trunk but I am missing the shorter tube and not sure what its purpose is. What vent line...
I am sure that many of you have had experinc with mice and your stored vehicles. Well this is my first encounter with them since we bought the car in 1997. The mice invaded the head liner and literally destroyed it. Pee and poop all around the windscreen and door glass. Had to remove the...
I was doing some repair work on the rear passanger window regulator and I dropped it. I heard something bounce off of the wall. Finally found a coiled spring on the floor. I now know where it goes on the assembly but I do not know what the orentation should be or how to reinstall it...