Search results for query: *

I have a 1971 LA318 I am having a helluva time getting the intermediate shaft out of. The old intermediate shaft walked right out, used a long magnetic to pull the oil pump attracting piece out as it was broken. Bought a new Mellings intermediate shaft, greased up, and installed. Used an old...

I bought a 1971 Steering wheel for my RR, problem is the steering wheel says Dodge. Couldn't find a steering wheel with word Plymouth on it as in the attached picture. I found a few online, but the rear retention clips were broken off. Does anyone have one they are willing to sell? If you are...

i am working on getting a 318 running decently. Has a QFT 600 CFM carb. I installed new plugs, wires, distributor cap, dizzy and starter (among MANY other things). Used a timing light and manually set initial timing by hand ( bumping distributor) to get the engine able to start. Set the carb up...

I have a QFT Slayer carb and honestly, it is kicking my butt. I have called QFT (holley) tech support and first they suggested I needed to rebuild the carb. Bought their carb rebuild kit and guess what? Same damn issues after rebuild! I searched the archive forums and have not found any...

Need a little help on figuring out a good solution to the sucking/vacuum noise I have. When I run my engine (440 RB), I get a sucking/vacuum noise from the oil dipstick tube. I have a new PCV valve on the D/S valve cover, going to the rear of my carb (QFT Slayer 650 CFM) and an additional air...

Looking for a good set of rear arm rest pads. Found a bunch of ratty ones on EBay and similar sites. Year One, Classic Industries and similar websites might as well sell only one as they want and arm and leg in prices. Any help in getting two, black arm rest pads would be greatly appreciated...

Saw a new one today, was at a gas station when a gentlemen pulled in next to me with a nicely redone 1971 satellite. Since I have a roadrunner, i struck up a conversation and he said his car had a 318 with a 5 speed transmission. So I asked what kind of transmission he had (thinking he would say...

I have a 71 RR I am working where I am cleaning up the electrical due to previous owners hack job. Looking to isolate the front turn signal circuit. I have been going over the wiring schematics provided by mymopar and I need a sanity check on some of my assumptions 1: BLK/LtGRN wire is the...

Gents, Here is the problem I am having on my 71 RR; dome light is constantly on. 1. Pulled door jamb switch (3 terminal) and cleaned contacts 2. Removed head lamp switch from dash and cleaned all connectors 3. Have power on circuit D31-188K coming out of fuse block to hazard flasher 4. Have...

Since the new format, I cant figure out how to post to the WTB forum. I am looking to purchase the side marker light nuts if anyone has some available. If anyone has some of these laying around, please PM me so we can work out the transaction. Thanks in advance!

Can someone post what the actual directions are for performing a band adjustment on a A904 transmission? Since I am changing fluid and filter, would like to freshen it up a little bit. Thanks in advance

Looking for the 6 bows for the headliner and headliner light assembly if available. Let me know how much you would like for these items.

Was driving the GTX today when I turned a corner and it felt like I got oversteer. Pulled into Walmart to see if something broke. Luckily nothing was broken. Drove home and my car was pulling to the right and it sounded like I had a flat, which I didn't. Got home and put the car on my lift...

I have a stock 440 on a 727 trans. Read on other FBBO post that running Rotella 15W40 oil and adding 4 oz. ZDDP will not hurt the engine and will hep. I now have 80+ psi on start up with cold engine. With a warm engine (195 degree), idling at 75 psi. Accelerate, i run 90+ psi for oil pressure...