Search results for query: *

Looking for a front drivers side remote control handle which is inside of the door trim panel. See attached photo or 73 body service manual section 3-31 figure 16 and 17, its called remote control handle - the spring on mine is broken. Send email with cost and price with photo Thanks...

I have a driveshaft with a Mopar 7290 u joint and will be getting a dana rear end with a 1350 series pinion yoke. How do I mate these up correctly Do I just buy a 1350 u joint and have it pressed in ? how do you install and will it fit ? Thanks for the help as usual.. ralph

Does anyone know where to get the rear light bezels refurbished for a 73 b body Road Runner. The wiring and light housing are one piece - meaning hard wired and then connected to the rear harness. thanks Ralph

My question is how stout is a 8 3/4 inch rear is in a 73 road runner - 3.23 gears per tag. I have installed a 522 inch stroker putting out 500 hp and 640 torque at 3500 rpm. a 5 speed tremec kit with HD driveshaft Will this rear handle the power and torgue I have or do I need to upgrade to...

Has anyone tried this kit from Firm Feel - removal of the rubber isolators above the leaf spring to axle. They state that this kit by removing the isolator increases handling but gives a firmer ride - the article says nothing short of incredible. thanks ralph

Need some help - I have a 1973 plymouth road runner - rally dash w/ tach All of the dash lights are out - new bulbs. Also the fuse for the instrument panel keeps blowing. I see a ground to the dash metal looks like it comes from the instrument panel wiring. I put in a new headlight...

Here's picture of my RR with 522 inch stroker, 5 speed tremec and TTI exhaust. Many new parts. Doing my punch list of minor items but runs well. Thanks to all for the help in the articles. Will be posting soon for help to complete. Much appreciated and glad to be a new member Ralph