Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My car was running on Tuesday, now cranks but won't start. I have power all the way to the plug, all grounds are clean and tight. Could the plug be fouled? Tank and fuel lines were drained when stored, fresh premium was put in tank. Thanks for your input.
Every time it rains I get water in my glove box and on the floor, the only thing I can think of is the wiper gaskets are shot. Any suggestions? Thanks.
I was thinking about trying VP 103 octane this summer or that race gas mix your own additive. Just wondering if it will be worth the expense or just expensive exhaust. I have Badger cast pistons and 9.75:1 compression ratio, Edelbrock top end and don't want to blow anything up. Motor makes close...
I will be changing the rad hoses on my 440 this spring and was wondering if there is a preferred temperature thermostat to use. I have no heater in the car but have been told temp can affect fuel consumption as well as power output. I think it has a 185 in it now as that is where it seems to...
I recently put 3/8 fuel lines in my car, pick up to carb. I still have the O.E. fuel pump with smaller inlet/outlets. I am wondering if the difference in line diameter is causing a pressure increase, I get excessive fuel smell in the car now after acceleration and raw fuel out pipes at idle. I...
I have a Mopar electronic ignition in my car, it had a NAPA grey ICM box and ran okay. The box fried over the weekend, power in, not out, no tach signal. I bought a Mopar performance orange box, I get tach signal, power in and out. It will not fire. I am hoping it is as simple as tweeking the...
Just wondering if anyone has tried those e3 plugs yet? I am using Champion plugs now because they were listed in the install instructions (yes I read them, twice) that came with my Edelbrock heads. I had used both NGK and Champion in the past, but am interested to know if these e3's are worth...
Any one know if the Lucas zinc additive used with conventional oil is safe to use. I have been using Joe Gibbs high zinc oil, but money is tight and I need to change the oil. Pennzoil and the Lucas additive are both on sale at the local parts store and would save me about $35. Just wondering if...
I need help to figure out what gear will give me the best results for my combo. I have a 493hp, 522lbt 440 in a 3190lb Savoy. The trans is a manual shift 727 with a 3000 stall converter, and a 8.75 rear with 3.23 gears. On the street it's fun and will run 13.5's all day at the track. I think it...