Search results for query: *

Dragged the wagon out today. Can't believe how solid the floors and quarters are. The white 340 challenger is next. Apparently it got wrecked in the 1970's and the 340 is long gone.

Installed new wheels and tires on the coronet

I bought a new magnum 500 15x8 to test fit on my roadrunner. It fit great on the rear but on the front the spindle appears to be to long to fit the center piece. Any one else seen this? - - - Updated - - - The cap is flush with the hub.

I have been meaning to post this. I had a problem running an Edelbrock RPM intake with a factory unsilenced breather under the stock hood of a 66 belvedere. I went down to my local parts store (we have one independent left) and went through a filter catalog. I found the shortest filter with the...

Getting ready to start the 68 383hp in my 67 GTX. The car has been sitting for twenty yrs. The engine turns over with a breaker bar. I'm going to swap out the carb and hook the fuel pump to a different fuel source. Besides new oil, points, and spark plugs what else do I need to check? I plan on...

The last time I took the undercoating off of the bottom of a mopar I used a propane torch and it was a pain in the butt. Last night I tried a new Makita heat gun and I have to say it works great. After about a minute of heating up an area the undercoating was easy to scrape off. Here’s the one...

Drove my 66 less than 25 miles since putting it back together and the new electronic regulator stopped working and broke a valve spring, which were new Comp cam valve springs. After driving the car less than 10 miles the battery stopped getting a charge. I checked all of the wiring didn’t see...

I sure would like to use this type of breather on my 66. Anyone know if this will fit with a holley carb., http://moparplus.com/product_info.php?cPath=61&products_id=1086

A one owner car.