Search results for query: *

Here is a very nice 8" Dynamic Converter, this was in my Road Runner but I never raced it. This is a very nice piece, I have a 1/4" mid plate in my car now and this doesn't work for me. This has 7/16" bolt holes in it The starter loosened up and/or was out of alignment and smoothed over a...

Here is a lightly used March serpentine pulley set up for a big block Mopar. This is the basic set up for crank water pump and alternator. Great condition 170.00 shipped in the US Thanks, Mark

Here is a nice older MP ductile iron rocker arm set up for a BB Mopar. These were moched up on my dad's 440 and he switched to HD stamped. They are used but in good condition, complete with rockers, shafts, adjusters, springs, bolts, hold downs. I know the pic shows one end bolt missing, I have...

Here is a new in box Jegs vacuum can. Bought it for 40 and never used it. 20.00 plus the ride. Thanks, Mark

Here is a nice Fluidampr balancer from my old wedge motors. I would have no issues running it still but my Hemi came with a new ATI unit. So this extra needs a new home, this is an internal balance unit. These are getting pretty expensive! So save here this finish is not perfect, but overall in...

Here is an old stock Big Block bronze distributor gear and oil pump drive. I can't remember if it is a MP part or a Milodon, it is one of those. 75.00 delivered Thanks, Mark

Here is a nice A & A reverse manual valve body 22770-1 used very little went to a brake. Also a deep mopar steel pan with the filter extension and bolts with a new molded reusable gasket 225.00 delivered in the US Thanks, Mark

Here is an old cast alternator pulley from Moroso #64840. Has been on a shelf for a long time, but not sure it was ever used. 25.00 Plus the ride. Thanks, Mark

Here is a nice and easy elephant ear set up I used to run in my car. Stock pump housing milled 1/4" off the back side, aluminum Mopar Performance water pump, t-stat housing, Hamburgers ears The plate is set up with a poly bushing at each end which is plenty strong and not as harsh as metal to...

Here is a nice lot of -8 hose ends: Earls: 2 - 8 90deg Swivel Seal hose ends 1 - 8 90deg Auto fit hose end 1 - 8 45deg Auto fit hose end 2 - 8 Str Hose end Aeroquip: 1 -8 90deg hose end NIP None of these were ever assembled 75.00 for the lot Thanks, Mark

Here is a really nice Hurst Super Shifter III with the separate reverse lock out lever. Was on a 833 trans I had, someone bent the stick on it to their liking, I have another one included that might work better for you. The boot is very nice, the upper bezel is there but a little pitted, the...

Here is more nice performance hose and fittings that should serve some else very well. All of my hoses are Aeroquip and the ends are the swivel style. The Overall Length and type of end are listed on the paper in the photos. First lot is from a pretty complex induction system, 8 hoses all...

Yet more of my spring cleaning, I have tons of stuff like this: 4 fuel filters, none of them ever had fuel through them. Aeromotive -8s as shown, 55.00 each - One sold, one left!! Can't remember the gold one, I think it is a Moroso piece, -10 in and out 40.00 Kinsler hard anodized, stainless...

One set of new header reducers from TTI. These came with a set of hemi headers but were not used, fit a 4" collector to a 3" exhaust tube. 40.00 plus shipping Thanks, Mark

Like the title says, no need for these: Jegs is around 50.00 30.00 shipped in the US Thanks, Mark

Hello, Here is a new in the package electronic ignition harness, MP P3690152 Also a MP orange box, this was in my GTX for a short time, I now run a chromebox 40.00 for both. Thanks, Mark

This is a very nice stroker crank windage tray fro BB Mopar or Hemi with standard pan bolt pattern. I got this 10 years ago or so with a never completed Hemi project. It was made by a company called Copperhead out of alum and anodized blue. These were generally advertized as 1” stroker...

Hello all, This has been around my shop for a looooong time. You would need the 2 tube pieces that get welded through the rear of the frame, and some cheap shackel bushings. Old DC/ MP sheet with it. 50.00 plus shipping Thanks, Mark

Hi, This is probably a long shot, but I have an 18 Spline Hemi Box trans that I would like to sell. Was in my dad's shop or mine for the last 20 years. Needs a new home. Here is what I know: Mechanically complete Turning the inputshaft by hand you can "go through the gears" seems to...

I got this converter in a street strip Road Runner that I converted to a 4 speed and don't own anymore. It is a TCI 10" street fighter converter. It stalled 3400 behind a nice 440. $150.00 plus shipping. Thanks for looking Mark