Search results for query: *

I have a new set of W2 race heads that have never been assembled and I also have the valves. Mopar Performance part P5249769 they are the 65cc closed chambers for a 59 degree(stock) block. Asking $900 plus shipping from 40272 I also have a new set of Headman Hustler W2 race headers for B and E...

P4876188 V8 Dual Plane Hemi Intake Manifold. Rectangle port and fits all hemi 426/472/528 engines. stock exhaust heat location on rear of manifold just like the original dual plane 4bbl production in-line manifold.Cost 237.00 brand new. This one has been bolted on but it has never had any fuel...

I have a set of Kieth Black 440 +020 pistons for sale. these are the hypereutectic pistons and they have the small quench dome Here is what KB says about them Bore is 4.34,Stroke is 3.75,rod length 6.78,Pin Diameter 1.094, compression height 2.057,Piston weight 775g, pin weight 190g, Comp ratio...

This is a Mopar Performance # P5249717 Offset brake adaptor which was used to move your master cylinder over to clear the Hemi valve covers. It cost $86 back in 1995 and I also have the adjustable master cylinder rod from Mancini Racing that you need with this, it cost $77.95 back in the day. I...

This is a Mopar Performance distributor adaptor that allows you to run an RB dist. in a low deck motor. They were about $50 from Mopar.I will take $25. Attached Images

This is an old set of Direct Connection 12.5-1 pistons for a 426 Hemi.Forged and in remarkably good shape for something thats been in my garage since the 70's. I cant remember if they are std or oversize but I will get the dial calipers out and get a measurment later.I'm pretty sure at this...

I have a set of TRW L2316 forged pistons that fit a 340 +060 which makes them 4.10 bore for a stock 3.31 stroke crank. 10.5 compression ratio with stock 340 heads.Used,dirty but in decent shape with minor wear on skirts.No pins. I would like $125 obo or trade something. You pay the actual...

I have a set of TRW L2316 forged pistons that fit a 340 +030 which makes them 4.07 bore for a stock 3.31 stroke crank. 10.5 compression ratio with stock 340 heads.Used,dirty but in decent shape with minor wear on skirts.Come with floating pins and locks. I would like $150 obo or trade something...

I have an Offenhauser 360 degree intake for an RB engine 413-440 in great shape.Big carb flange(maybe Dominator?) Iwill take $100 plus freight or you pick up.It would look really good on an early car or Nostalgia car.Open to trades also.