Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 440 with 60 over pistons the engine ate a cam and needs to be taken apart and cleaned. Pretty much a complete engine minus a cam and lifters. Has a MSD RTR distributor but needs a cap. And a set of valve covers. Other than those items and a good clean up should be a solid 440. I had...
I have a 5.2 Magnum engine. I don't really know much about it. If anyone needs parts from this engine let me know. Its complete from pan to heads. No intake is present.
Heads
Pistons
Crank
Rods
Valve train
100.00 for the whole engine. AGAIN It must be picked up here in Georgia and Again I know...
I have a 489 sure grip clutch style it has new clutches in the sure grip as well as a doctor diff rebuild kit. I opted for the crush sleeve eliminator when it was put together. Also has all new ring bolts. I am not sure the guy set it up correct. Probably needs to be set up again. Asking 500.00...
I collected these parts over a few months. I attempted but failed at a suregrip rebuild.
I bought a new clutch kit. New bolts for the case halves I also bought a new kit from doctor diff with a crush sleeve eliminator. I had a friend set it up initially but the clutches were bad. So I pulled the...
I have 2 Holley Sniper coil drivers that were not used. They have never been hooked up and are in new condition. They retail for 114.00 I will sell them 75.00 each shipped. You will have to research them and figure out how to use them. There was barely any mention of them in the sniper manual...
Also its a HI. I don't know if it works I did try it on a car battery but got nothing. Throwing a price up 20.00 + shipping. If anyone knows a trick to test it let me know. Doesn't seem to work hooking it up to a battery and grounding the bracket.
I'm looking for a yellow 33 tooth speedometer gear. I believe what is in the 727 now is a white gear and I think for 3:91 gears. If anyone needs this gear Id swap it for a 33 tooth. Or I will buy a 33 tooth. Let me know thanks.
I have 26 inch tall tire and 3:23 gears. Speed shows around 80ish...
I'm looking for a slant 6 4bbl intake and a used header/s I know some of you guys probably have tons of slant 6 parts laying around. Shoot me a price shipped to 30157. Thanks I can buy a new intake for 500 bucks and headers for another 500 but figured I could help someone clean out their garage...
I have a 700 cfm Holley for sale I honestly don't know much about it. But, everything moves freely. It has the chrome dual line inlet tube included. This came off a running engine. I'd like to get 200.00 for it with the fuel line. I would probably go through it and rebuild it since I have not...
I have this radiator that came out of a 1971 Satellite the lower hose tube was loose I have since fixed it but have not tested it since the repair. It doesn’t have a Mopar parts number on it that I can tell. 75.00 plus shipping I’d say it’s a core radiator at best and probably needs work.
I no longer have my 440 so I don't need this air cleaner or the pie tin. I'd rather trade it for a 66 air cleaner for a 4bbl But since I have to put a price I'll say 150.00 plus shipping. That's what I have in both of the parts. I paid 100 for the air cleaner and 50.00 for the pie tin. It could...
These are in great shape they are a matching pair. I will be doing headers and do not need these exhaust manifolds. Here is the information on them. Will update with pictures. 200.00 or best offer. Will trade for a few parts that I need. Complete Alternator bracket and bolts for a 1966/67 383...
As stated above I had this on my 440 Id rather have a 66/67 style air cleaner. I am willing to trade. I will note that the 440 tin has one small ding in it from some moron trying to shut the hood on it. I used the plastic handle of a screw driver to get the ding out. Its not bad now but its...
Carter 4640 SA 750 CFM This carb will need to be gone though. I'm asking 150.00 or make a decent offer. I would suggest a total rebuild since it has been sitting in my garage for quite a while now.
1969 4640 C-4-AVS 440 A/T & A/C
According to AMD I have a set of 71 440 valve covers. Id trade for 66/67 big block valve covers or some mopar covers.. I don't really need the 71 covers but they might help someone that needs them. I edited this, wrong year posted above. Since I have to put a price 150.00 But would rather swap.
I finally got around to getting it out of the car. If anyone needs this K-Member let me know. Its out of a 318 Poly car and should be the upgrade you need for your /6 car. Should fit 66-70 B-Body. It comes with everything that was attached. Steering gear for PS as well as PS pump, torsion bars...
I have the galvanized fill tube from my parts car if any one is interested. It still has the attached floor pan but will remove it. $50.00 plus shipping. includes the tank tubes as well.
I have a 383 4bbl cast iron intake. Its in good shape 100.00 shipping prices I was quoted cost me a sale before. So I'd prefer someone pick it up so you dont think im trying to rake you over the coals for shipping. I was quoted 95.00 last time.
I cant find one of the pictures on my computer...
I have a set of Big Block TTI 1 7/8 headers I'm not going to use. I have to put a price so 400.00 but would trade for a 66 Belvedere trunk pan or other interior parts like a front seat bench or buckets. I was looking on the TTI site and the headers are 900 or so bucks. If anyone is interested...