Search results for query: *

I finally reached 10000 miles on my coronet. It sat with 9968 for decades. I put the proper speedometer gear in the tranny and a new speedo cable and watched it turn to 10000. Now it won't go to 10001. I hear a click and the speedo needle jumps. It almost sounds like a gear stripping trying...

Bump steer-can it be this bad? i have a 67 coronet, sits just a bit lower than stock. if i set my toe properly (0-1/8 toe in) while sitting at ride height, the tires squeal while driving. it appears the rise in the front end while under power puts the tires toe in. what i have done to get...

Some more items that came with the car that I can't figure out where they go... does anyone recognize these parts?

These came with the pile of parts for my 67 coronet. Does anyone know what they are or where they go?

I hope this doesn't seem like a stupid question but im finally trying to install the console in my 67 coronet. When I lay the console in place. I can line up the back holes and the middle holes in the console to the mounting brackets and that seems to line up pretty good. my question is on the...

on my 67 coronet, when i align the master spline on the steering wheel with the steering shaft, the wheel is out 180 degrees. I have not yet checked to see if the coupler was aligned properly with steering box, but would assume it is since i would image it would not go on easily without aligning...

There is plenty of info on the plastic turn signal cancel cams that seem to break pretty often. What I cannot seem to find is the cam itself that mounts under the steering wheel the actually hits the plastic cam to release it. It seems to be the same part number across almost all of the models...