Search results for query: *

She finally sits on the ground and rolls.

I was looking around on the net the other day running cam profiles through the sim and stumbled across this site. Lot's of great info if you are techie http://garage.grumpysperformance.com/index.php?threads/how-your-cam-lsa-effects-your-compression-torque-dcr.1070/

As some of you may remember I had a cage built a while back and had to rip the whole thing out and start over. I decided the car was going to be way too fast for a cage and basically decided to have a chassis built. Most of you probably don't follow my thread in the gen3 swap section, so I...

Any of you guys out there have a full tube chassis? Can you post some interior and under hood pics for me. Looking for ideas for a project. Thanks

I know most of you probably dont follow my build in the new hemi section. I wanted to share this to make sure that you avoid using him if possible. I know recently he did a blue road runner that was very fast. I wish I could find that guy to ask him to check all his weld. I have absolutely...

Those of you with fiberglass deck lids what are you running for a seal in the trunk? Anyone have pictures? I have the pin on deck lid from sledcity. It want to make sure it seals up because its not just a race car, it will see some street time.

What do you use for a seal around the trunk. I bought a replacement factory seal and it looks like it will make the decklid buldge up on the edges without enough weight to compress it. Thoughts?

We are still trying to decide what to do with the front down bars. Through the dash or around it. Anyone have pictures of through the dash? Pictures of around the dash?

I am curious if anyone is running the magnum for pro link 4 link setup? Does it work well? Does it give you enough adjustment? What kind of combo are you running? What 60ft and et's? On what wheel and tire combos?

I am well underway on my 64 Polara build. It is getting a 392 gen3 hemi with a 76mm turbo. I am expecting to make 800 on pump gas and 1000 on e85. I am wondering if there is a snowballs chance in hell it will hook on a 325 drag radial with caltracs? I have room for a 390 drag radial if that...

I know some of you guy have to be running crank trigger ignitions with RB setups. Can you post pictures and tell me what balancer you are running? I am getting ready to switch from the Throttle body EFI to multiport on mine and do a cam and crank trigger. I have the cam trigger part figured out.

Does anyone know of a place that sells and aluminum gauge cluster cover that I could cut and put my own gauges in?

Anyone have a 64 dodge with a sled city hood or dash that can post some pics?

The rear of my car is lowered about 2-2.5 inches. About an inch and a half set into the rear frame rail on the rear leaf spring mounting point and 1 inch drop monoleaf cal tracks. I am looking for an adjustable QA1 shock for the rear. Anyone have a part number from something they have had...

I went with a griffin 32 inch wide radiator in my car to try to keep the car cool in the Texas heat. I was wondering if anyone else had done the same and might know a upper radiator hose part number. The stock hose is about 4 inches short. it needs to move towards the passengers fender and...

I wanted to get some thoughts from the group on my car. I am just about done building it. It should run here shortly. Here is what I have 64 Polara 500 Stock front seats no back seats stock glass stock decklid, fiberglass hood minimal sound deadening no heater box 440 aluminum heads, water...

I will start by saying its been almost 25 years since I built my last big block. It was a stock'ish 383. I obviously build gen3 hemi's all the time. But this is a whole different animal. So here is what I am thinking 500 inch 440 source kit (10:1 for 93 pump) I have a virgin 73 440 block...