• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. funknut

    Lowering rear end - what's the proper way?

    I currently have all stock components in the rear of my 68 Charger plus Caltracs (they were on when I bought the car, probably don't help anything, but I don't mind the look, so they stayed) and I'm looking to lower the rear 1"-2". I've read you can flip the front spring hangers, get the...
  3. funknut

    PS pump and gearbox extremely hot

    1968 Charger, Borgeson PS gearbox, hydroboost w/ Wilwood MC and a recently rebuilt (under 250 miles) Federal pump. Everything works fine when warming up/cold, but once up to temp I'm getting some very bizarre behavior. When cold, lots of power assist to the brakes, but when warm the power...
  4. funknut

    Source for front hubs for drum spindles?

    Looking for replacement hubs for front drum spindles, a couple of the studs on mine are working loose. I see dr. diff has some billet ones for $300, but I'm more interested in stock replacements. Is there a good source for these or should I be looking for used take-offs?
  5. funknut

    Power steering, no pressure?

    Hi All, I could use some help troubleshooting. 1968 Charger, 440 with what looks to be a TRW pump. I have the Tallon hydroboost setup as well, so high pressure out of p/s pump into brake booster, then high pressure from brake booster to p/s gear box. Up until a few weeks ago everything was...
  6. funknut

    Need a recommendation for good high pressure hose ends

    I have installed a hydroboost and need some recommendations for high pressure -6 AN 90 degree hose ends. I have standard -6 AN stainless steel, lined hose, just like: https://www.summitracing.com/parts/sum-230620/overview/ I have gone through 3 lines now and decorated my engine bay and garage...
  8. funknut

    Installing Hydraboost, Wilwood MC contacts shock stud?

    As I was fitting everything up I found that the Wilwood MC is contacting the shock shaft on the top of the shock tower. I'm using the Tallon Hydraulic booster with the Wilwood tandem master cyl. Below are some not-super-great photos, but give you an idea of what I'm looking at. I...
  9. funknut

    K-frame damage, what are my options?

    Hello - I've disassembled the front suspension on my '68 Charger to replace bushings and shocks, and upgrade UCAs and strut rods. In the process I've found damage to the k-frame and sway bar. It looks like it's taken quite a good hit at some point over the years, and I'm wondering your...
Back
Top