Search results for query: *

just restored a split bench and installed in my 67' Satellite 2-door and I am missing some small odds and ends. Anyone have these, or know where to get repros of this stuff? -seat slider release cable, connects left to right slider -clips that retain back seats brackets on to the lower bench...

Looking for a single piece of hose for my '67 satellite front defrost vent. everywhere I have seen that sells are kits. Yes I have tried locally at auto parts shops and it is both the wrong kind of hose and they refuse to sell me anything but the entire length. If you have a length of 2-1/4...

Looking for a split bench to recover. Vinyl can be crap, i have a legendary cover on order. Just need rust-free metal and good padding. Thanks, Andrew

Gentlemen, Looking for the special square headed screws for the instrument cluster bezel, missing a couple, standard tapered screws were used which of course will crack the plastic. Can send a picture if needed. Black or chrome OK. Also looking for the plastic trim pc that goes under the...

Folks, Strike plate for my glove box latch (small pc of spring steel with 2 screw holes) broke. Looking for replacement. Thanks, Andrew

Looking for a driveshaft between 52-52.5", prefer 9260 u-joint and 727 slip yoke if possible. Part #'s 2660635 2852162 2852118 2660635 I'm in KY, willing to make a drive if necessary. Thanks for looking!

Got one of these from a forum member a few years ago, shop had my car and lost the darn thing. 1967 satellite, column shift 727, the orange pointer that clips on the column and points to gear. Rough condition is fine, I can paint it. Thanks for digging through your stashes, Andrew

Looking for a very good condition rear bumper. AMD has them on backorder with no estimated date. Thanks, Andrew

Gentlemen, I am looking for a transmission kickdown/carb linkage rod that is 10-11" long, threaded on one end and with the 90degree on the other end. Can be straight, or have some minor bends in it. I'm also looking for the proper kickdown return spring. Can't find them on mancini or ebay, so...

Looking for the long coil spring that wraps around the outside of an 11" front drum. Can be a bit rusty as long as it is still serviceable. Thanks, Andrew

Gentlemen, Im looking for the 2-wire (one male, one female) plug on a factory electronic ignition harness that hooks to the distributor. The repro's i have tried are a crappy fit, and I don't want a whole new EE harness ($$$) because I don't need all the ECU connections. So, if you have an old...

Greetings all, Looking for a 4-way flasher knob (little black plastic one with the silver/chrome disc insert) and Chrome/silver disc inserts for all my round dash knobs. I need 6 total. If anyone makes a reproduction of that little insert or knows a good way to replicate it, I'm all ears. My...

Looking for the black plastic cigarette lighter element. I have the in-dash portion, just need the element with the black plastic knob that came in 1967 Satellite and GTX

Looking for a replacement passenger side tail lamp lens for my 67 Satellite. Don't need the chrome trim, just the red plastic part. Had this posted months ago, still looking. Would rather not shell out the crazy $$ for a set of repro lenses, but I'm about to that point. Thanks, Andrew

Looking for a replacement for this braised-together mess. 10" straight kickdown rod with threaded end. This is the one that connects carb linkage to the bellcrank back by distributor (LA). Thanks for looking.

Looking for a replacement passenger side tail lamp lens for my 67 Satellite. Don't need the chrome trim, just the red plastic part. Thanks, Andrew

Looking for the little orange pointer that indicates the gear. 1967 satellite with column automatic shift.