Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Trying to remove the park cable from my 64 Polara parts car. Is there a tool to release where the pushbutton end is "crimped" to the assembly? I don't mind mangling the donor but if I decide to put it in my good car I'll need a better solution.
Thx. Bernie
Installing a refreshed short block in my 440. The oil pump shaft was scored where it runs on the bronze bushing so I bought a new one from Melling. I used the old one to make an oil pump priming tool, cut off the gear and welded a longer shaft on it to chuck up in the drill. Noticed that the...
I have had a heat soak problem on my 64 Polara with a 440 Magnum clone motor. I just put a 1 in. open phenolic spacer under the carb, not a good one, an Ebay cheapy because I wasn't certain it would help. I was surprised to notice a power increase off the bottom and well into the midrange on my...
Anyone using these angle plug heads on a 440 with Mopar RT Magnum exhaust maniflods? Any fitment issues? They have 75cc chambers. This motor currently has a set of Mopar 452 heads. Would the Eddys be a performance upgrade? Whaddaya think?
Thanks, Bernie