• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 67 Coronet Conv

    How hot is a coil supposed to get?

    Been messing around with coils in my car, got a MSD high vibration (can be mounted horizontal) and this thing gets smoking hot after 5 min of idling. Engine starts spurting and then does. The. Takes a quite a few cranks to fire back up. Is this normal? I did jump the ballast resistor. 67 cornet...
  3. 67 Coronet Conv

    Ignition system prefrence

    Going to upgrade my ignition system, thoughts on the 3 systems below? Currently have electronic ignition with Mopar ECU and MSD high vibration coil. MSD-6AL with MSD high vibration coil Rev-n-nator with their coil http://thertgarage.com/products.html FBO with their coil...
  4. 67 Coronet Conv

    Possible Ignition Issue

    Thinking I have some sort of ignition issue with my 67 coronet. Went for a drive yesterday evening and about after 10 minutes the car died while coming to a stop. Cranked it and it came back to life and drove another 300 yards and it died and wouldn’t start again. After 5 min cranked it and it...
  5. 67 Coronet Conv

    True 12 volt source for Choke

    Got a 67 coronet with a 440 and a Holley 870 street avenger carb. Car has a hard time starting, need to rev and hold it at 1200 rpm to warm up a little so it will idle on its own and has a ruff start till it’s been warmed up for a min or so. I’m thinking my elec. choke is not working properly...
Back
Top