Search results for query: *

My son has a 230 casting 400 big block with the thicker mains he wants to trade for 4 speed stuff. Big block bell housing and 4 speed for his 68 charger or 900 cash. He was knocking the pistons out and scratched a cylinder so we had Dale Meers racing out in a new sleeve. It is standard bore...

Aeromotive 1000 fuel pump with matching filter only used about a month then car was put back to stock. Works perfect. 400 for both plus 10.00 shipping anywhere in the 48 states. Or you can pick up in Kentucky 42754

My son has a cold weather 400 block with the 230 casting. It’s standard bore and has had one sleeve professionally installed because of a scratch in that cylinder. He wants to see if anyone would trade for an r block . He’s wanting to build a turbo 408. Located in Leitchfield Ky

Cheetah valve body I bought and have no use for it after I sold the car. 150 bucks plus shipping from 42754

Turbo action valve body full manual reverse shift part number 17166 asking 250 plus shipping Leitchfield Ky 42754

Indy intake that came off a Low deck 512 stroker that has port work already done inside the plenum. Asking 450 plus shipping from 42754

My son is selling his 9” converter For 727 transmission works good. Stalls approximately 5000 behind a built 440. Asking 500 bucks, prefer pick up in Leitchfield Ky 42754 but I can ship if needed

I have a 383 block and main caps I’m not gonna use. It’s dated 1-66 and it already had machine work done when I got it. Bored .030 over . Asking 800 obo Leitchfield Ky 42754

Brand new mopar performance big block solid cam and lifter kit. 312 .590 purple shaft new in the box. 325 plus shipping from Leitchfield Ky

Pair of big block mopar bulldog aluminum heads I was going to put on a 512 but I just switched directions on my build. These have not been ran since freshened. No valve springs because i hadnt decided on a cam yet. My machinist spent countless hours porting these to match a friends max wedge...

I have a set of 516 big block heads that are practically new. They have roughly 50 street miles and are perfect ready to bolt on. They have a nice port job and have 2.14 1.81 valves with springs for up to a .550 lift cam. Cost over 1200 to do the work and i will take less than half what they...

i have a mopar 48* R block that is bored 4.12. Part number p4532435. I bought it from my machine shop but im going a different direction. Pick up in Ky 42754 or i can ship thru fastenal. Asking 1500

Indy 440-1 max wedge cast iron heads from the machine shop. New titanium retainers, intake valves, valve job, 750 roller springs. Asking 2000.00. Pick up in leitchfield, Ky. 42754

Sold the car before i got these back from being done. Pair of 906 heads fresh from the machine shop ready to bolt on. only taken out of the bag to take pics. they have a mild port job with 5 angle valve job, milled .020. new positive valve seals and hardened seats for unleaded fuel. springs are...

8 3/4 third member 742 case with new richmond 4:30 gears, new bearings and new stock spline spool. 550.00 pick up in leitchfield, ky. 42754 or i can ship if needed.

400 thats bored .030 with trw pistons, double roller timing chain, 292 .525 comp cam, melling oil pump. comes with torker intake , 452 heads and rocker arms. has maybe 500 miles on it since it was rebuilt. cam is new and has only been broken in. asking 1250.00. pick up in leitchfield, ky. 42754...

Pair of 906 heads ported by Geral Geary in Louisville ky. He was one of the best mopar head porter around. I had these on my 440 in a 70 dart and went 6.50 in the 1/8 mile then i had them freshened and ran them in a street car for about 800 miles. they are ready to bolt on. they have .525...

Very nice Ported 906 heads with new 2.08 1.74 valves and 5 angle valve job. new guides.they have been milled .005 just to clean them up. I have 2 different sets of valve springs to choose from. one set is for .500 hydraulic and the other is .650 solid. asking 700 plus shipping from ky. 42754. no...

750 hp double pump holley carb. cost 650 new and i will take 400 shipped to lower 48. leitchfield ky. 42754

I have a very lightly used 324 duration . 650 lift comp cams solid lift cam and lifters used very little and lifters are in order. too much cam for me. also known as the herb mccandless grind. asking 150.00 for cam and matching lifters. plus shipping from leitchfield, ky. 42754.