• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Race Ported 906 heads

Status
Not open for further replies.

mopar mafia

Well-Known Member
Local time
11:55 PM
Joined
Jun 17, 2010
Messages
419
Reaction score
56
Location
ky
Feedback: 1 / 0 / 0
Contact seller
Pair of 906 heads ported by Geral Geary in Louisville ky. He was one of the best mopar head porter around. I had these on my 440 in a 70 dart and went 6.50 in the 1/8 mile then i had them freshened and ran them in a street car for about 800 miles. they are ready to bolt on. they have .525 springs on them, been milled .080 and have 2.14 1.81 stainless valves and bronze guides. running a small block now and just sitting collecting dust. only asking 650.00 for them and i have double that in them. pick up in leitchfield, ky. 42754 or i can ship if needed.

906heads6.jpg 906heads5.jpg 906heads4.jpg 906heads3.jpg 906heads2.jpg 906heads1.jpg
 
Pair of 906 heads ported by Geral Geary in Louisville ky. He was one of the best mopar head porter around. I had these on my 440 in a 70 dart and went 6.50 in the 1/8 mile then i had them freshened and ran them in a street car for about 800 miles. they are ready to bolt on. they have .525 springs on them, been milled .080 and have 2.14 1.81 stainless valves and bronze guides. running a small block now and just sitting collecting dust. only asking 650.00 for them and i have double that in them. pick up in leitchfield, ky. 42754 or i can ship if needed.

View attachment 518441 View attachment 518442 View attachment 518443 View attachment 518445 View attachment 518446 View attachment 518447
Your inbox is full. I'm interested.
 
Pair of 906 heads ported by Geral Geary in Louisville ky. He was one of the best mopar head porter around. I had these on my 440 in a 70 dart and went 6.50 in the 1/8 mile then i had them freshened and ran them in a street car for about 800 miles. they are ready to bolt on. they have .525 springs on them, been milled .080 and have 2.14 1.81 stainless valves and bronze guides. running a small block now and just sitting collecting dust. only asking 650.00 for them and i have double that in them. pick up in leitchfield, ky. 42754 or i can ship if needed.

View attachment 518441 View attachment 518442 View attachment 518443 View attachment 518445 View attachment 518446 View attachment 518447
So what do they flow, out of curiosity ?
 
I dont have the flow sheet anymore but peak flow was in the upper 280s
 
I have a couple ppl asking about them but i still have them. I will get u a quote later today
 
Status
Not open for further replies.
Auto Transport Service
Back
Top