Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am looking for someone who may have the dimensions of the Rocker Panels for this year on the GTX. Long shot I know, but there is a CNC place here than can make them if I can provide them the dimensions - a CAD drawing would be awesome. Anyone?
Craig
AMD has the 71 bumper on backlog for about 6 months according to Jeff at 521 restorations. Can anyone explain the difference? Can I use a 72 for the time being?
Craig
I may have screwed up and need some information. I let my engine builder choose my intake and didn't think about hood clearance. I have a 440 with Edelbrock Heads and Victor intake. I have an aftermarket air grabber hood setup and after seeing the height of the setup, I am thinking I need to...
I have started on rebuilding my steering column and ran into an issue removing the upper bearing. It was seized on pretty good and in my haste to get this thing off, I banged the shaft on my shop floor and collapsed the shaft. What are my options to fix this? Do I drill out the holes and try to...
I just did the rebuild on all the suspension components on my 71 GTX. I ordered a replacement Pitman Arm from PST. The replacement arm is about an inch shorter than the original. I spoke with PST and they confirmed the part is correct. I also pulled the Pitman Arm from the 71 RR donor car since...
I am replacing the gas tank & fuel lines in my GTX, and was curious about re-using the fuel vapor separator in the wheel well. Instead of running the vent line to the breather cap, would it be better to adapt the charcoal canister setup that started in 72 to avoid hot/cold start issues? Or is...
I need some help with the placement of the GTX QP emblems. My quarters were repaired and the original holes are gone. I stupidly forgot to take the measurements and I am hoping someone here can help me out with the exact placement measurements.
Thanks!
Hi - I am working on repainting my steering column and dash frame for my GTX. It is a TX-9 interior and I was wondering where would be the best source to get the proper reproduction paint for these pieces? Appreciate any help on this.
Craig
I am going to start removing my rusted out A Pillars on my 71 GTX and wanted some advice on how to best tackle this job. Mine are pretty rusted out and it is hard to see how everything fits together. Looking for pics of how these are attached and how I should brace the car.
Thanks!
Craig
I am working a engine builder for the 440 in my GTX and he was wondering what kind of clearance there was to support going to after market single plane manifold? I am assuming there should be enough clearance, but I was wondering if anyone ran into issues with this building their engines?
Craig
Now that hunting season is all but over I can transition over to working my car. I picked up fairly rough 71 all numbers matching GTX many months ago and just started working on it. It needs new A-Pillars, Roof Skin, Patching on some of the roof bracing, floors, trunk, lots of other rust...
Can someone tell me if the A-Pillars and roof skin are the same for 71-74 B Body cars? I have a 71 GTX that needs both A Pillars replaced and the roof skin either patched or replaced. Trying to source the parts, but wasn't sure what years I could pull from.
Thanks!
Craig
Hey,
My non-rallye dash in my 72 satellite is really torn up and I was thinking of going with a rallye replacement. I found this on ebay and wanted to know what you guys think about price and condition. Also does the dash frame need to be swapped out or is it standard for all dash clusters...