FOR SALE 11.75" pin caliper brackets.

[Cop car wagon]

Yes, I have my flame suit on.
These never grew on trees, and now they are impossible to find.
So I am going to use price as a motivation to sell a pair.
I have them on my 71 (small bearing spindle) with early C body rotors and calipers. The braking power is incredible even with manual brakes.
$325 plus shipping, which means $350 in a medium flat rate box.
Friends and family or I'll wait for a check in the mail.


Ebay sellers, who might be members here are asking up to $299 for regular 10.75" brackets, not that I'm using them as a guide. Last confirmed sale price on here was $225, but threads have had mention of $300 ask.

 

[gkent]

So are these "c" body brackets ??

 

[dadsbee]

Where a part # listed would help immensely ...

 

[Vaanth]

The pictured caliper brackets have the numbers "0965 4101" on them. These 0965 4101 pin type caliper brackets are for the 11.75” rotors originally equipped on 1976 B-body models produced on or after January 1, 1976 through 1978. The 0965 4101 caliper brackets are the same for either side. The Chrysler part number for these pin calipers is 3880557.

 

[Cop car wagon]

Thank you, Vaanth.
Yes folks, fit B+E.
Sorry, I thought the 11.75 discription was sufficient
I only mention the c body brake hardware on my car to show you the options available, besides just the "cordoba" rotor.
I run the thicker c body rotor for more mass. Repeat braking from over 100mph can overheat the thinner .920 spec rotor.
I really should but the taller 73 up spindle on for the alignment benefit.
But then I would need to change to big bearing C body rotors.

 

[Cop car wagon]

If you hurry, there is a pair of these on ebodies only for $40.
Of course, if 20 people jump on them, it will tip him off that that beyond a deal.