15" Magnum 500 wheels wanted

[Dave Pratt]

I have a set of 14" Magnum 500 wheels with rings that came with my 70 Roadrunner that I just bought but I'm wanting to put 15" Magnum 500s on it.Would anyone know where I might find them?Any help would be,well,a big help...thanks...Dave

 

[72Satellite440]

Ive seen new ones like these, but old org ones are tough to come by
http://www.magnumforce.com/store/detail.asp?ProductID=3909&CategoryID=81&BrandID=&Category=&SubCategory=&Search=&Page=

 

[696pack]

Those wheels never came in 15" from the factory on Mopars. There was a 1968 Magnum 500 type wheel (all chrome w/o trim ring) that came on 68 Shelbys. The manufacturer for these wheels supplied all 4 domestic auto makers in the 60s and 70s.

 

[ozonedepletion]

I think 68/69 mustangs had 15 inch magnums, wheel stud pattern is the same but not sure about the offset. Centre caps are not as long as mopar but you can change the emblems by getting inserts ffrom year one

 

[696pack]

I think 68/69 mustangs had 15 inch magnums, wheel stud pattern is the same but not sure about the offset. Centre caps are not as long as mopar but you can change the emblems by getting inserts ffrom year one

I believe the only 68-69 Mustangs with 15" Magnums are Shelbys. The register hole in the center of the wheel on Fords is smaller than the Mopars and they will not seat properly against the brake drums. The have to ge ground our to work or they will loosen up.

 

[68 Roadrunner]

Vintage wheels also