1962 dosge dart

[brunobeef]

Hello, I recently purchased a 62 dart that had been converted to a solid axle up front. My plan is to restore it to original suspension again. Will anything 62 up bolt in or will I have to find original 62 k member ect.

Thanks in advance, I cant seem to find much info for these online

 

[Jerry Hall]

I think 62-65 B body K frames are the same.

 

[RemCharger]

The 62s had a weird motormount I believe. For that reason a 63-65 v8 k would be desirable.
AFAIK

 

[Armyvet25]

dosge dart....is that the new bit coin JK​

 

[brunobeef]

I read this stuff 5 times before I post for grammar errors... the dyslexia is strong with this one

 

[matthon]

62 had a V8 k-frame and a slant 6 k-frame.

Engine mounts were different for 318 vs big block, but both had the same intermediate steel mounts.

Pic shows intermediate mounts on top, 318 engine mounts on bottom. There would be a rubber biscuit between them.

 

[j-c-c-62]

I would think there would be numerous options for your choosing of complete bolt in IFS with a K frame.
I will have one, but it's a good time to upgrade your brakes and ditch the stock rather drums, and mine are too far away relative to the many others that are likely to pop up.
You are in the right place looking IMO.
Reach out as a last resort.

 

[j-c-c-62]

I read this stuff 5 times before I post for grammar errors... the dyslexia is strong with this one

Don't sweat it, we have a few closet spelling Nazi's, but a lot more Red Cross members to help you out.