1964 Fury Convertible top adjustment brackets

[aspemino]

My 1964 Fury Convertible project is slowly coming together. The top mechanism was in pieces and I have mostly figured how it goes back together thanks to some pictures in my manual and online. Could anyone give me a picture of the 3 hole adjustable brackets that attach the top mechanism to the body? After going through all my boxes I don't think I have those two brackets so I might have to make some. I did find the rear 2 hole brackets I guess the biggest thing I need to know is the thickness of the bracket and where the x-link for the top attaches so that the geometry is correct. Does it attach to one of the three bolt holes? Thank you for any info available.

 

[moparpaul]

Drivers side of my 65 satellite convertible.

 

[aspemino]

You are awesome! Thank you, those are great pictures!

 

[moparpaul]

You’re welcome. Let me know if need anymore. My top is shredded so I can send more in daytime.

 

[aspemino]

Thanks again for the pictures. I made a couple brackets today. I think they should work well!

 

[coloradodave]

I found a few pictures of my 63 Fury that might help you as well...

 

[coloradodave]

Whoops! Looks like I'm a little late to the party. Your pieces look great!

 

[aspemino]

Whoops! Looks like I'm a little late to the party. Your pieces look great!

Thank you. I still appereciate the pictures and time taken.

 

[Geff McCarthy]

I bougth a reproduced MOPAR Master Technician's Service Reference Book 63-9, Servicing the Convertible. No parts diagram, but useful info.
here is one on eBay: 1963 CHRYSLER THE MASTER TECHNICIANS SERVICE REPAIR SHOP REFERENCE BOOK 63-9 | eBay

 

[aspemino]

I bougth a reproduced MOPAR Master Technician's Service Reference Book 63-9, Servicing the Convertible. No parts diagram, but useful info.
here is one on eBay: 1963 CHRYSLER THE MASTER TECHNICIANS SERVICE REPAIR SHOP REFERENCE BOOK 63-9 | eBay

Thank you