SOLD 1964 Polara/500 right fender, wide side molding

[Lee Robinson]

I have a right side, wide stainless steel molding for the front fender on a 64 Polara or Polara 500. It's in real nice condition.
The "bird" and the thin molding have been sold. I thought this might go on the left side too, but there is a slight angle at the end
by the door, so it is right only. $45.00 plus shipping from El Dorado Hills, Ca. Shipping back East will probably exceed price of part.
PM me if interested.

 

[Jesse6869]

Would you have a 64 dodge 300 4 door front floor pan? Thanks jesse

 

[Lee Robinson]

Would you have a 64 dodge 300 4 door front floor pan? Thanks jesse

Main floor and trunk floor were shot. I have the rear seat pan that goes over the differential.

 

[Jesse6869]

I Need the one thats over drive shaft/ rear feet area.

 

[Lee Robinson]

I Need the one thats over drive shaft/ rear feet area.View attachment 1448042

This is what I have. Main floor gone. If this is of interest, PM me.

 

[Jesse6869]

No thanks you anyway