1965 dodge coronet spring hanger

[EARLY B]

need the measurement of the rear spring front hanger, from the mounting surface to the center of the spring bolt distance on a stock hanger.
Thanks for any help

 

[5.7 hemi]

Should be 20 inches if I remember correctly.

 

[Fran Blacker]

Should be 20 inches if I remember correctly.

Think 65 is 21".

 

[5.7 hemi]

Guess I remembered incorrectly.

 

[Fran Blacker]

 

[Fran Blacker]

There's a little contradictory info. 65 to 70 b-body says 22", wonder if that's for a Plymouth? It says 64/65 21" B-Body front segment. Anyone have an answer to this???

 

[5.7 hemi]

If you use the 21 vs. the 20, it moves the rear backward an inch, gets it further away from the front of the tire well on the quarter panel.

 

[EARLY B]

Thanks Guys. The question was just the hanger itself. Not the spring.