• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1965 Plymouth Belvedere II Roller/Project

Status
Not open for further replies.

VANDAN

FBBO Gold Member
FBBO Gold Member
Local time
6:16 AM
Joined
May 27, 2011
Messages
7,878
Reaction score
15,889
Location
Western NY
Feedback: 8 / 0 / 0
Contact seller
For Sale: 1965 Plymouth Belvedere II. Car was originally from Virginia, so it's a very solid car that someone used as a "Hot Rod" for some time. I started the resto on the car, as far as the tear down, and have it down to the frame, with the body and glass still in place. The drive line, suspension, interior, and other items are located in Western New York, but I recently moved the car to my friends shop in Denver, NC, to start the body and paint work. I've run into some personal trouble, and think it would be best to sell it at this time. The car is a very good candidate for a resto, as it needs work in the lower quarters, driver side floor pan (included), the trunk floor well, and straitening in several spots where it was "over-used". I have the original 273, 3-spd on the column tranny, 8-3/4 rear end (3:23 open), bench seat, glass is very good, all the electrics worked before the tear down, and the speed-o reads just over 38,000, and seams like the original mileage on the car, by the condition overall. The driver side front frame is slightly tweaked, but it's headed to the frame shop shortly for the repair, so it will be corrected before the sale. I can provide many pics of the car, before, during, and after the tear-down, and will be willing to work something out to re-unite the parts, and the roller with a buyer. I have about $5k into the car, plus the cost of the frame repair (which I will cover), so I'm asking $4700, but will consider reasonable offers. Contact me through the site, and I'll get back to you as soon as I can, but I don't use a computer every day, so it may be a few days. I have a transferable registration for the car...Thanks 100_2750.JPG100_2751.JPG100_2756.JPG100_2753.JPG
 
After the move

I havn't had any interest in the car, so I thought i would post some of the " IN TRANSIT " pics. The frame repair is on hold until the rack frees up from the everyday routine jobs. I will probably be bringing the car back up to WNY after the repair, so it will be reunited with the rest of the parts. You can see the extent of the frame tweak on the driver front bumper mount if you look hard enough. It's slightly higher with a small twist, and should straighten right out. Thanks for lookin', and THANKS for the FREE AD BBO ... 100_4324.JPG100_4325.JPG100_4327.JPG100_4326.JPG100_4322.JPG
 
looks like a good project good luck with the sale...........rob

The car has been brought back up to Western New York, so it is still available. If you have an interest in taking a look at it, or any other questions, drop me a line on it...HAPPY & BLESSED HOLIDAYS TO ALL
 
Status
Not open for further replies.
Auto Transport Service
Back
Top