odwan12
Active Member
LOCATION: Burlington County, New Jersey, 20 Minutes from Philadelphia
PRICE: $2,000 OBO
Item Description:
Hey everyone, I have for sale a 1965 Plymouth Satellite Rolling Project. This is a 'complete' project car, meaning 90% of the parts (trim, screws, etc) is here less the bumpers.
The condition of the car is decent, with the lower quarters in a bad way as well as the bottom rear of the front fenders. Floor Pan and Trunk are good though. I am unable to find any holes after a good look with a buddy and flashlight.
I have a lot of extra parts to go with it, including a new front radiator support. Whoever had this car prior to me was racing it and put a small hole in the front to mount a trans cooler.
interior is all there, trim, door sills, seats are pretty decent, back seat is almost perfect... i don't believe this was a center console car but i have the center piece for the console. windshield is cracked, but have a replacement piece.
8.75 rear, i believe its 742 case. drums at all 4 corners, steel wheels.
biggest problem i see is the body work as always, but its a solid car. Rocker panel on driver side is dented because some goof probably tried lifting it with a jack.
Im sad to let it go, as it is my favorite B-Body, but I just don't have the time right now to pay her while giving all my time to mother Army. hope it goes to a good home, or her parts are donated to needing 65's
I have TITLE in hand.
Any questions feel free to post or PM me.
- - - Updated - - -
PS: i only have a title, looked for a build sheet or anything else, but I'm sure it was an original 318 car. It has the correct (and I'm sure original) K-member for 65's.
PRICE: $2,000 OBO
Item Description:
Hey everyone, I have for sale a 1965 Plymouth Satellite Rolling Project. This is a 'complete' project car, meaning 90% of the parts (trim, screws, etc) is here less the bumpers.
The condition of the car is decent, with the lower quarters in a bad way as well as the bottom rear of the front fenders. Floor Pan and Trunk are good though. I am unable to find any holes after a good look with a buddy and flashlight.
I have a lot of extra parts to go with it, including a new front radiator support. Whoever had this car prior to me was racing it and put a small hole in the front to mount a trans cooler.
interior is all there, trim, door sills, seats are pretty decent, back seat is almost perfect... i don't believe this was a center console car but i have the center piece for the console. windshield is cracked, but have a replacement piece.
8.75 rear, i believe its 742 case. drums at all 4 corners, steel wheels.
biggest problem i see is the body work as always, but its a solid car. Rocker panel on driver side is dented because some goof probably tried lifting it with a jack.
Im sad to let it go, as it is my favorite B-Body, but I just don't have the time right now to pay her while giving all my time to mother Army. hope it goes to a good home, or her parts are donated to needing 65's
I have TITLE in hand.
Any questions feel free to post or PM me.
- - - Updated - - -
PS: i only have a title, looked for a build sheet or anything else, but I'm sure it was an original 318 car. It has the correct (and I'm sure original) K-member for 65's.
