1966 Dodge Coronet Parts

[MA02093]

I am looking to replace/upgrade some of the parts on my 1966 Dodge Coronet. The main items that I am looking for are:

-Trunk trim/ decal
-Grille and Headlight bezals
-Working Speedometer
-Dash

On a seperate note and unrelated, does anyone know if a hod does not latch shut does the latch need to be replaced? If so I could use a new latch. Feel free to email about any other parts as one can never have enough spares. Thanks in advance.

 

[YY1]

Latch spring on a 66/67 is a common issue.
Should be able to: A- manually return the latch, and B- find a spring that works.

What decal is on a 66 trunk?...jack decal?

Grille will be pricey- they get beat on the edges- but you might get lucky.
I was patient- saw several go for $400-ish...but got a really nice one on ebay for $200 and was very happy.

By dash, do you mean dash pad? Repro for $150, probably the easiest way to go.
I wouldn't ship a brittle, used one. May be more than one repro, and one may be better than another.

What model? 440 or 500? Trunk trim is different.

There's a 500 panel on ebay right now. 440 trim is hard to find. seems to peel or dent easy.
Repro is available in solid aluminum for $$$ 125.

 

[daredevil]

got a link for that 125. repop

 

[MoparBill]

I parted out a 66 2 door sedan and have tons of parts. I'll check this weekend for the parts you listed. PM me with any other needs.

 

[moparsteve636]

P.M. sent to mad2093

 

[YY1]

Apparently there are now at least two...

These folks don't have one listed right now, but IIRC, theirs is solid-
http://www.ebay.com/itm/1966-DODGE-...Parts_Accessories&hash=item4855ab2a06&vxp=mtr

Then there's this one-
http://www.ebay.com/itm/1966-Dodge-...966|Model:Coronet&hash=item3cd18ddad3&vxp=mtr

- - - Updated - - -

Hmmm, second one looks solid as well, might be same part.