NOTTA TUFCAT
Active Member
Original trim panel from 1966 Belvedere II. Can also be used for Satellite
All mounting tabs look good, but no hardware.
Being sold as a very nice restoration core, or for nice driver or survivor car where small blemishes are considered okay.
The original silver finish is faded. The anodized aluminum is very nice overall with only a few areas where moisture has made a tiny blemish. I wouldn't call it pitting, but it needs to be re-anodized for show quality
This panel is super straight with no bends or twists.
A prime part for show car re-anodizing. It does have a lower dent of the left side near the bumper edge between the "P" and "L" of Plymouth logo that can be easily worked out.
Please see all pictures, ask questions, and ask for more photos.
Thank you
Tom
Plymouth, MI 48170
PM only.
$300 Plus shipping
All mounting tabs look good, but no hardware.
Being sold as a very nice restoration core, or for nice driver or survivor car where small blemishes are considered okay.
The original silver finish is faded. The anodized aluminum is very nice overall with only a few areas where moisture has made a tiny blemish. I wouldn't call it pitting, but it needs to be re-anodized for show quality
This panel is super straight with no bends or twists.
A prime part for show car re-anodizing. It does have a lower dent of the left side near the bumper edge between the "P" and "L" of Plymouth logo that can be easily worked out.
Please see all pictures, ask questions, and ask for more photos.
Thank you
Tom
Plymouth, MI 48170
PM only.
$300 Plus shipping
Last edited:
