1967 Dodge Charger Spare Tire Hold Down

[Charger Too]

My 1967 Dodge Charger bracket that is welded in the middle of the spare tire opening is missing. A bolt hooks on this bracket and then goes through the spare tire with a large wing nut on top that secures the spare tire to the trunk floor. Could someone on the forum send me a photo of what this bracket looks like? Thank You!

 

[Rebellion]

Hope this helps! Mine is a '66.

 

[John Folz]

This should help also. Took these when putting in a new trunk floor in my 66. Had to transfer the bracket over to the new pan.

 

[Dean Prevolos]

Do you happen to have a photo of the spare tire hold down bolt that slides into that slot? I am looking to buy one as mine is missing. Thank you.

 

[Dean Prevolos]

The Dodge Bros. had an original hold down fastener which they kindly sold to me. Thank you !

 

[YukonCornelius]

The Dodge Bros. had an original hold down fastener which they kindly sold to me. Thank you !

Dean, do you have a link or number for this hold down rod? Thanks!

 

[Dean Prevolos]

If you are asking for the part number, I will have to look in my files. I did my build a few years ago. If you are asking for the number for the Dodge Bros. I will find it and post later today. Thank you.

 

[RedBeard]

 

[RedBeard]

Then:

 

[RedBeard]

Original top wingnut looks like this one:

 

[Dean Prevolos]

If you are asking for the part number, I will have to look in my files. I did my build a few years ago. If you are asking for the number for the Dodge Bros. I will find it and post later today. Thank you.

The Dodge Brothers, Jerry, 269-275-1672

 

[YukonCornelius]

The Dodge Brothers, Jerry, 269-275-1672

Thanks Dean. I’ll reach out to them. Sorry for the delay, I never post on those forums and forgot to check for replies.

 

[YukonCornelius]

Original top wingnut looks like this one:

View attachment 1847506

Thanks Redbeard, I appreciate it! Sorry for the delayed response.