1967 Dodge Coronet R/T 440 4 speed. 1 of 1360 produced with the 4 speed transmission. Has dana 60 rear axle with 3:54 gear. Transmission has C-97372 cast on the case with no vin pad.
Car has '72 440 short block in it now that does rotate. I have a correct '\cast date '67 HP block that goes with but need repair. Standard bore, tanked, and checked for cracks. Both ears on the block are broken and would need a donor block to weld repair at a shop that specializes in welding cast iron.
Frame rails are solid accept for 2 holes in the torsion bar crossmember. Drivers side inner fender well has a cut out. Maybe for a fender well header. Drivers side front floor has some rust. Trunk is solid with the usuall rust around the wheel wells. Dent where right side quarter panel meets the door. I have the original console tach that has been repaired , new rear window, rebuilt correct carburetor, 915 heads, correct radiator, fuel tank, intake manifold.
I can take more pictures of where you need or send pics.
Car is located in Illinois. 60531
$16,500. obo.
![IMG_6365[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6365-1-jpg.1900099/ "IMG_6365[1].JPG")
![IMG_6366[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6366-1-jpg.1900100/ "IMG_6366[1].JPG")
![IMG_6367[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6367-1-jpg.1900101/ "IMG_6367[1].JPG")
![IMG_6368[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6368-1-jpg.1900102/ "IMG_6368[1].JPG")
![IMG_6369[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6369-1-jpg.1900104/ "IMG_6369[1].JPG")
![IMG_6371[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6371-1-jpg.1900105/ "IMG_6371[1].JPG")
![IMG_6372[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6372-1-jpg.1900109/ "IMG_6372[1].JPG")
![IMG_6373[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6373-1-jpg.1900110/ "IMG_6373[1].JPG")
![IMG_6374[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6374-1-jpg.1900111/ "IMG_6374[1].JPG")
![IMG_6364[1].JPG](https://www.forbbodiesonly.com/moparforum/attachments/img_6364-1-jpg.1900112/ "IMG_6364[1].JPG")
Car has '72 440 short block in it now that does rotate. I have a correct '\cast date '67 HP block that goes with but need repair. Standard bore, tanked, and checked for cracks. Both ears on the block are broken and would need a donor block to weld repair at a shop that specializes in welding cast iron.
Frame rails are solid accept for 2 holes in the torsion bar crossmember. Drivers side inner fender well has a cut out. Maybe for a fender well header. Drivers side front floor has some rust. Trunk is solid with the usuall rust around the wheel wells. Dent where right side quarter panel meets the door. I have the original console tach that has been repaired , new rear window, rebuilt correct carburetor, 915 heads, correct radiator, fuel tank, intake manifold.
I can take more pictures of where you need or send pics.
Car is located in Illinois. 60531
$16,500. obo.
