1967 GTX inner fender replacement

[rich hourigan]

hi guys, im getting ready to replace both inner fenders on my 67 gtx, I have never done this before so im looking for some advice. I just finished replacing the floor so drilling spot welds is not new to me , my biggest concern is where to support the car and what measurments are critical during this surgery... after the floor replacement I put the car on a rotisserie, will the car need to come off the rotisserie for this job? the car is just a bare shell. Any advice from the FBBO family will be appreciated... thanks Rich

 

[493 Mike]

I would think extra support at the firewall area to the floor would be sufficient. Do one at a time.
Mike

 

[rich hourigan]

thanks Mike, that's what I was kinda thinking.... supporting the frame as close to the fire wall as possible, im going to make sure the car is level before I start drilling the spot welds, I just don't want any twisting of the frame once I remove the inner fenders