not so famous bob
Well-Known Member
for sale ;
1968 barracuda form S fastback : 440/505 , victor type cnc alum. heads, polished victor/matched intake, 9 qt. hemi pan with single line ext. pick up , magnum force drag front end/with added home made strut rods , .600 solid street roller/using hughs 1/6 rockers, alum.water pump housing/with hi flow pump, fully auto.727, hughs 3500 convertor. full 1350 driveshaft, dana 60/with detroit locker/3;73 gears. Paint is near perfect , could be car showed with new or rechromed door handles and tail light housing and a good detail .
6 point roll bar w/swing out, recovered stock buckets,and black finished business coupe interior, orange stripe/war paint was added after the first pic , car has aprrox. 2500-3000 miles on it (speedometer broke) .
1200 cfm throttle body fuel inj. , weight is 3270 w/o driver,half tank of gas. Has been to the dragstrip once , went 11:90`s/120mph , with no front end lift at all, and 275 drag radials spinning .
Have since went to liter front springs and full cal trac set up,and 295 60 d15 hoosiers on back , wit 205 on front full st of weld prostars w/ extras, rear wheels are diff now because they fit perfect in the stock wheel wells, 8 1/2 x 15 old school ????. asking $35,000 with a fair amount of acummulated stuff, $25,000 as a roller......getting too old with bad knees to get in and out of it , need a B body again , I guess...
oops , not sure about getting this in the right place , MODS HELP !
1968 barracuda form S fastback : 440/505 , victor type cnc alum. heads, polished victor/matched intake, 9 qt. hemi pan with single line ext. pick up , magnum force drag front end/with added home made strut rods , .600 solid street roller/using hughs 1/6 rockers, alum.water pump housing/with hi flow pump, fully auto.727, hughs 3500 convertor. full 1350 driveshaft, dana 60/with detroit locker/3;73 gears. Paint is near perfect , could be car showed with new or rechromed door handles and tail light housing and a good detail .
6 point roll bar w/swing out, recovered stock buckets,and black finished business coupe interior, orange stripe/war paint was added after the first pic , car has aprrox. 2500-3000 miles on it (speedometer broke) .
1200 cfm throttle body fuel inj. , weight is 3270 w/o driver,half tank of gas. Has been to the dragstrip once , went 11:90`s/120mph , with no front end lift at all, and 275 drag radials spinning .
Have since went to liter front springs and full cal trac set up,and 295 60 d15 hoosiers on back , wit 205 on front full st of weld prostars w/ extras, rear wheels are diff now because they fit perfect in the stock wheel wells, 8 1/2 x 15 old school ????. asking $35,000 with a fair amount of acummulated stuff, $25,000 as a roller......getting too old with bad knees to get in and out of it , need a B body again , I guess...
oops , not sure about getting this in the right place , MODS HELP !
