• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1968 Charger R/T roller

Status
Not open for further replies.

70B5Cuda

Well-Known Member
Local time
11:38 AM
Joined
Sep 30, 2010
Messages
487
Reaction score
1,136
Location
Newton, Ks
Feedback: 0 / 0 / 0
Contact seller
1968 Charger R/T roller. I bought it in San Antonio, Texas about 6 months ago; about 2 weeks later i came across a survivor 69 Charger and bought it. I am searching for a base model 1968 or 1970 Charger to buy/modify (altercation, late model semi, and 6 speed trans); I just can't cut up an R/T. This RT has super solid subframes, torsion bar crossmember, hood hinge areas, and rockers. Trunk floor needs patched or replaced; cabin floor pans have pinholes but the cabin floor pans are still quite solid. The quarters have filler and were trimmed for wider tires. The rear window corners and "quarter panel to roofskin" seams have rust which will need repaired. Original paint code was FF1. It has a super cheap black paint job that was applied in the early 80's) that has a lot of orange peel/texture to it. Was a 440/auto/8.75" (3.23 single track) but the original engine/trans/diff are long gone. A core 1976 440 and 727 are included but they will need rebuilt for sure. I don't have seats, grill, etc-all the nitty gritty details and pictures are in the ebay link below. The car is a BIG project but it has good frame rails/structure. If you have any questions, please ask. The VIN tag is present and I have a clean/clear Kansas title, but no build sheet. $13,000 or best offer. Im in Newton, Kansas

http://www.ebay.com/itm/162199671181?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

CH1.jpg
 
Last edited:
Status
Not open for further replies.
Auto Transport Service
Back
Top