1968 Gtx windshield

[tileman61]

Put new windshield in my 68 Gtx trying to get the two pieces of stainless steel trim to sit tight on the bottom it snaps into clips just doesn't sit tight any tricks

 

[Propwash]

Did you install the correct revel trim clips, or the clips in the right spot (half the clips are taller than the other half)? If that's not the issue; don't think you can (with windshield and seal installed), but if you could gain access to the lower clips, you may be able loosen the screws and get a little leverage pushing the clips a little lower down, thus trim seating lower.