SOLD 1969 Plymouth Roadrunner Project Car

Mopars For Sale

Thread Status:
Not open for further replies.
  1. nascar37

    nascar37 Well-Known Member

    Messages:
    164
    Likes Received:
    14
    Joined:
    Dec 27, 2015
    Location:
    Avon, NY
    Local Time:
    4:00 PM
    Contact Seller
    I plan to list this car on eBay in the near future but hoping I might be able to work out a deal with a forum member first.

    1969 Plymouth Roadrunner Project


    383 – 4 Speed – Post Car

    Originally R6 – “Scorch Red" with Black Bench Seat Interior

    RM21H9Axxxxxx – Matching VIN & Fender Tag

    This is a fairly complete project car that was disassembled for restoration 25 plus years ago and then has mostly sat in storage. It was a complete running and driving car that I personally drove in the early to mid- 1990’s. It is currently a solid rolling chassis and will require a complete restoration with a fair bit of metal work. The car has been partially reassembled for the sake of transport, it rolls and steers but the brakes are not currently in working order. I have bought and sold several muscle cars from long distances so I will do my best to describe the condition accurately and completely. I will provide additional photos upon request for serious potential buyers.

    Engine:
    Correct “E” Code 383 HP block

    Correct RM219A Roadrunner VIN stamp with non-matching serial number

    Standard bore block with crank and main caps

    Rods and pistons come with the car but are not currently in the block

    Correct 906-cylinder heads, 402 oil pan etc.

    Transmission & Rear End:
    The original 4 speed parts were all gone when I purchased the car in the 1990’s - it was running and driving with a 727 console shift automatic in it

    The car will come with a 727 transmission core

    A new 4-speed hump comes with the car but is not welded in so you can go either direction with the car

    8 ¾ rear – 742 case – comes with open carrier gear set not currently installed

    Body & Chassis:
    Six Pack fiberglass hood

    Fenders were removed, stripped, and primed a number of years ago

    Drivers side front frame rail is patched

    Doors are fairly solid but will require metal work

    Drivers side rocker requires replacement

    Front floorboards have been replaced with originals from another car

    Rear floorboards are original and solid

    Both quarter panel skins require replacement
    • Passenger quarter is bad behind the wheel and below the side marker area
    • Drivers side quarter had a prior patch panel in it which has been cut out
    Small holes on either side of the rear window will require patches

    Extremely solid decklid with no rot in the lip or corners

    Trunk floor and extensions will require replacement

    Both rear frame rails are solid up to the last few inches towards the rear (a few holes - not completely crusty and weak – definitely supports the weight of the car on jack stands)

    All wiring harnesses were removed and are included in the sale

    Interior:
    Front bench seat is the only major component missing from the interior (had race buckets in the 90’s)

    Rear seat is included

    Headliner bows, door sill plates, rear view mirror, heater box, dash pads, glove box door, ashtray, kick panels, and a number of plastic and soft trim parts are included

    Glass:
    All glass is intact and in decent driver quality condition

    Side windows roll up and down

    Trim:
    Windshield stainless surround included and in nice shape

    Rear window stainless surround included and in nice shape

    Side view mirror included

    Taillights, parking lights, side markers are all included

    Front and rear bumper cores are included


    Wheels\Tires:
    Currently rolling on a set of Magnum 500 Wheels and very old non-road worthy bias ply tires

    Clean and current (2021) New York State transferable registration in my name!

    Note that NY does not issue titles for vehicles older than 1973 – ownership is signed over through the Registration. Car is being sold “as is” with the understanding it is a rolling project and not a running and driving vehicle. Due to non-working brakes pickup will require an electric winch to load safely. I am happy to work with any legitimate shipping company or help load it on your trailer.


    $8,500 or best reasonable offer

    Located in Avon NY 14414
    South of Rochester


    A8F21C5D-A179-4B84-9F69-A0FAA9D14D25.jpeg 668FD30C-4F87-4A23-97CB-94578FB80918.jpeg DD3F50D1-9582-4CC1-A88B-FE88182E92BA.jpeg 30CD5F0A-886B-488E-B9D5-FDE8D352189D.jpeg D4AD1BFF-22EA-49E1-B261-1F0F2534D8F6.jpeg 71132334-CE77-45A1-A846-DC50C2F5270C.jpeg E1C0CC7D-15AF-4F87-A85D-8BA866C7D1C5.jpeg 0C95023E-4A1A-4A81-92D6-142A3B035780.jpeg 79FF2925-0EBE-4BF6-9F71-364B0B144800.jpeg EF65C9A8-60E5-4300-B69D-1F4FC514BF21.jpeg
     
    Last edited: Jul 28, 2021
  2. nascar37

    nascar37 Well-Known Member

    Messages:
    164
    Likes Received:
    14
    Joined:
    Dec 27, 2015
    Location:
    Avon, NY
    Local Time:
    4:00 PM
    Sale Pending
     
  3. 63SplitWindow

    63SplitWindow Member

    Messages:
    5
    Likes Received:
    3
    Joined:
    Jul 2, 2021
    Location:
    Montgomery County PA
    Local Time:
    4:00 PM
    PM me if the sale falls through.
    Thanks,
    Bill
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.