• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 1969 Plymouth satellite glove box lamp

Status
Not open for further replies.

dcw88

Well-Known Member
Local time
9:06 AM
Joined
Mar 25, 2021
Messages
63
Reaction score
48
Location
UK
Feedback: 0 / 0 / 0
Looking for 68-70 B body glove box lamp parts. Switch, harness and lens.
 
Not sure if you’re looking for all original, OE, or reproduction parts. When I did the glove box on my 68 Satellite, I used a Ford Dennis Carpenter Glovebox Switch. Link below, about $20 and fit my car great. Got the lamp lens from Classic industries part MN3255. Link below.

Glove Box Lamp & Switch Assembly for 1963-79 Ford Trucks and Cars | Dennis Carpenter Ford Restorations

https://www.classicindustries.com/product/mn3255.html

Hope this helps you somehow. Jeremy in Elkhorn, NE.
Was it a plug and play install once the wiring was done?
 
I’m assuming plug and play means did it fit the OE hole and hook up to the wiring the same. Yes, it had a bullet style connector and grounded to the frame like the original. The lens was a reproduction so it worked as expected. $20 for the lamp/wiring, it’s worth a try.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top