SOLD 1969 Road Runner N96 Air Grabber System

[69Beeper]

Used, original 1969 Plymouth Road Runner N96 'fresh air' under hood Air Grabber system/ assembly. This includes:
1. Center, left, and right sections with cable that mounts to the underside of the N96 Air Grabber hood.
2. "Carb Air" cable that mounts to the underside of the dash.
3. Two Road Runner hood vent assemblies: inserts, grates, 383 call outs, and gaskets that mount to the N96 air Grabber hood.
4. Original Steel oval 4 barrel air cleaner assembly for a 383 (lid, base, wing nuts, and used filter element)

Unrestored/ original condition with some minor cracks and very small, repairable damage. This is a used system that has great potential for restoration. Its in honest condition. I have had this in storage for over 25 years. Only reason I'm selling is because I went with an original 6 pack set up. Will need mounting clips and hardware. $1200. Located in Elkton, MD. Local pickup always and shipping is possible (but not included) Please PM with any questions. Thanks, FBBO.

 

[Mzorn]

Would this also be correct for 69 gtx 440 ?. If so I'd be interested in taking a look at it . I'm almost in your back yard here in Conowingo
Thanks Mike

 

[hamtramck]

pm sent

 

[69Beeper]

Mike,
This would work for the GTX except for the air cleaner base plate. The one I have here is a 383 base which is lightly taller to accommodate the smaller height of the 383 vs 440. If you have a 440 base plate, the rest will work.
Shane

 

[Mzorn]

Mike,
This would work for the GTX except for the air cleaner base plate. The one I have here is a 383 base which is lightly taller to accommodate the smaller height of the 383 vs 440. If you have a 440 base plate, the rest will work.
Shane

Would like to come by and look at it . If you can pm me a phone # . I can't figure out how to pm you

 

[Mzorn]

Used, original 1969 Plymouth Road Runner N96 'fresh air' under hood Air Grabber system/ assembly. This includes:
1. Center, left, and right sections with cable that mounts to the underside of the N96 Air Grabber hood.
2. "Carb Air" cable that mounts to the underside of the dash.
3. Two Road Runner hood vent assemblies: inserts, grates, 383 call outs, and gaskets that mount to the N96 air Grabber hood.
4. Original Steel oval 4 barrel air cleaner assembly for a 383 (lid, base, wing nuts, and used filter element)

Unrestored/ original condition with some minor cracks and very small, repairable damage. This is a used system that has great potential for restoration. Its in honest condition. I have had this in storage for over 25 years. Only reason I'm selling is because I went with an original 6 pack set up. Will need mounting clips and hardware. $1200. Located in Elkton, MD. Local pickup always and shipping is possible (but not included) Please PM with any questions. Thanks, FBBO.

View attachment 338768 View attachment 338769 View attachment 338770 View attachment 338771

 

[69Beeper]

Would like to come by and look at it . If you can pm me a phone # . I can't figure out how to pm you

PM'd you (I think).