1970 charger stone guard removal/help please

[davek]

It looks like it was installed with rivets,my back shield had bolts. Do I just drill them? thanks

 

[WileERobby]

Yup.

 

[kiwigtx]

You will have to drill those out. Mine had hex-headed self-tapper screws.....looked like they were correct to me.

Looks like someone had trouble finding screws for your car Dave.

 

[Kern Dog]

Those are riveted. I removed mine and never put them back on.

 

[Bee1971]

Rivets or Screws at the factory

I have seen both on factory unrestored cars

Went through this with my 1971 Superbee

I don’t know how clear this page will show up

 

[Kern Dog]

I've read that the second shield above with the linkage at the bottom was only for automatic transmission equipped cars.

 

[dadsbee]

#11 or 3/16 drill. Some were riveted, some were screwed. My Bee was riveted on the drivers side and screwed on the passenger!

 

[MWbirdLOVER70]

It looks like it was installed with rivets,my back shield had bolts. Do I just drill them? thanks

View attachment 1520065

View attachment 1520066

Rivet here and bolts on starter protection sheild

 

[threewood]

My early build 69 GTX had rivets. The repop splash guards come with rivets as well.